Honeywell 98686 MP909E1232 PNEUM. ACT 5-10# SPRING RNG PNEUM. ACT 5-10# SPRING RNG

5-10 PSI PNEUMATIC DAMPER ACTUATOR REPLACES MP909A

The Seamaster Volumetric Control Valve is designed to operate in an oil flood system. The position of the needle valve stem controls flow to the next stage. Technical Information: Actuator Type: Pneumatic Insulation Class: B - NEMA Type 4 Body Material: Steel Height: 3-3/4" Length: 7" Width: 3-3/4" Actuator Mounting Position: Top Detail Description: 5 10 PSI PNEUMATIC DAMPER ACTUATOR REPLACES MP909A

This pneumatic damper actuator is designed to replace part MP909A. It is available with a switch volume of 0.8 cubic inches and pressures up to 10 PSI. This typically is used for applications in the heating, ventilation and air conditioning (HVAC) industry.

The MP909A Pneumatic Damper/Actuator is a dual ball valve made for gas grills. This single actuator replaces Honeywell 909A for use with natural gas or propane connections. It is a replacement part that allows the gas valve to control the incoming air from outside.

This pneumatic damper replacement part is a 5-10 psi damper, black in color, and comes with a mounting plate. It has a sight glass and an on/off lever.

The MP909 is an ideal solution for replacement of 11 Series actuators and VA17C pneumatic controls. The wire lead with connector makes it easy to install and it is completely interchangeable with P/N MP909A.

Replacement for Honeywell 98686-0008 98680-0007 MP909A MP909B MP909C MP909D MP909E Pneumatic valve actuator provides sprinkler control by turning on and off a pneumatic solenoid valve.

Honeywell Pneumatic Actuators are used to control airflow into ductwork for heating and air conditioning systems. They are available in a wide range of pressure and flow ratings in various styles, depending upon specific requirements. These small chamber pneumatic actuators are designed for use with temperature controlled systems. Use in any application where a precise amount of heat or air conditioning is desired. This single acting, spring return actuator is operated by an external air supply regulated from 5 to 10 psi (3/5 to 4 bars). Features: Rated at 5-10 PSI (3/5-4 bars) (