PNEUMATIC DAMPER ACTUATOR FOR CONTR
Honeywell 6025 MP918A1057 8-13#W/Pos5or10#SpanIntN/C MT PNEUMATIC DAMPER ACTUATOR FOR CONTROL FROM A DISTANCE
Honeywell 6025 - Pneumatic Damper Actuator- 8-13 Dials, 210/230V, MT Force, 3 Position 5 Or 10 SPAN IN/C, 0.2 / 0.1 N/C - White - Also known as: Honeywell 6025 - Pneumatic Damper Actuator- 8-13 Dials, 210/230V, MT Force, 3 Position 5 Or 10 SPAN IN/C, 0.2 / 0.1 N/C - White
Honeywell's 6025 Direct Acting Pneumatic Damper Actuator is designed for compatibility with all of Honeywell's Horizontal and Vertical-Mounted, Recirculating Hot Water Fan Vents. The 6025 is a direct acting pneumatic dampers to control the airflow into a duct opening. The damper operates by pressurizing the air chamber inside the actuator so that, as the actuator stem is raised and lowered, an opening is created at the duct inlet port. This allows room air to enter the duct as needed to maintain target temperature levels.
The 6025MP Actuator is the perfect choice for pneumatic damper applications where the 12VAC PN6025MP Switching Power Supply is utilized.
The Digital Pneumatic Damper features a series of atmospheric pressure sensors. When activated, the system control will automatically adjust the dampers to the appropriate position and then maintain the damper setting until a change in setpoint is received. The actuator output is a pneumatic signal from 10-120 psi.
The Honeywell 6025 Series is a range of mechanical pressure-controlled damper actuators controlled by a normally open electrical contact. The 6025 series utilizes a 5/8" bore, flat square shaft and a center hex for ease of knob mounting.
Honeywell 6025 MT Series Pneumatic Actuator with Non-Conferr...