HONEYWELL MP953F1101 MP953F1101 PNEUMATIC VALVE ACTUATOR R.A. 8-13

PNEUMATIC VALVE ACTUATOR R.A. 8-13

HONEYWELL MP953F1101 PNEUMATIC VALVE ACTUATOR R.A. 8-13  The Honeywell Valves 8100 series position control valves feature a new, molded construction with a vertical rod to protect against damage during shipping. Quick donning plug. Drop-forged brass body and bonnet for long service life in severe applications. Maintenance is simplified by removal of two screws for easy disassembly of the parts, promoting reduced downtime.

Honeywell's MP953F1101 PneumaticValveActuator RA8-13 2-Positions, 100-120C,Open&Close, 3-wire with starter(PNP) is a valve actuator capable of controlledly starting and stopping pneumatic valves (which are often used on HVAC setups and other such devices).  This is the preferred Pneumatic Valve Actuator for use with pneumatic valve systems that can start or stop the flow of gas/air.

The HONEYWELL MP953F1101 Pneumatic Valve Actuator R.A. 8-13" direct connects to the system, allowing it to control a small group of solenoids and valves. Among its product features are no electrical power required and pressure range 0.0 psi to 100 psi.

The Honeywell MP953F1101 Pneumatic Valve Actuator R.A. 8-13 psi 120/240V (MP953F1101) is used to close or open a valve at a preset pressure. Controls the point at which air will be supplied to or exhausted from a part of a system.

The Honeywell MP953F1101 Pneumatic Valve Actuator RA8-13 is a pneumatically operated system that provides reliable operation and ease of control. It includes a welded valve, 2-way bypass, custom mount bracket kit and installation manual. The manual of this Honeywell MP953F1101 Pneumatic Valve Actuator RA8-13 is thoroughly illustrated with drawings that make it easy to set up the device.

The Honeywell MP953F1101 Pneumatic valve actuator is a quarter-turn actuator with R.A. 8-13 PSI air inlet pressure and 0-100% spring return springs. It is designed to activate valves from fully open to fully closed positions with a single actuator. The pneumatic actuator is applicable to many types of pneumatic control systems where reliable low cost control of flow from zero percent to 100 percent is required.

This PNEUMATIC VALVE ACTUATOR is a pneumatic system accessory used to automate the operation of valves.