"Nibco" PC16S

Nibco PC16S1/2-11/4" JAW PRESS KIT FOR PC-280

This Nibco PC16S1/2-11/4 JAW PRESS KIT FOR PC-280 is used as one of the innovations for pressing and holding any type of PIPE in place.

Nibco PC16S JAW PRESS KIT FOR PC-280

The Nibco PC16S kit contains 1/2"-11/4" Jaws, Screws, Pins & Spring. The 'Jaws' are made of hardened steel with two mounting methods for Installation on the Nibco 280 or the Press-P-CUT II These jaws cut 3/32"-3/4" OD Tubing. The screws & pins are 12 point to assure a positive grip. The special SCREW with SNAP RING allows you to CUT THE HOLE in the end of the tubing so that you can install any style of fitting without tools. After cutting the hole,

The Nibco PC16S JAW PRESS KIT is a specifically designed pressure vessel repair kit for the Nibco PC-280. The kit contains parts for repairing the jib and coupler assembly, as well as the jib head inner seal.

The Nibco PC16S Jaw Press Kit is a great accessory to have on hand when you need to change out a worn seal. This kit will make your life easier and save you the hassle of dismantling your entire machine just to access the seal.

The Nibco PC16S comes with 1-1/2" and 2" Jaws. The Nibco PC16S comes with a 5 Year Warranty

The most common pipe fitting press tool used by plumbers is a sleeve wrench, but this tool often slips off of the pipe. Nibco designed the PC16S to be the most unique and strongest press tool in the industry. It " cups " the pipe firmly and grips it with 360 degrees of pressure on 11/4" – 2" pipe (up to 1-1/8" thick). The press nut design is also different from other tools available–the parts are carefully fitted together to prevent any movement when tightened.