Nordyne 626513R 150-200F AUTO Limit Switch 150-200F AUTO Limit Switch

150-200F AUTO Limit Switch

150-200F AUTO Limit Switch - Nordyne 626513R

The 150-200F AUTO Limit Switch is designed to help maintain the temperature in a room. It ensures that the temperature remains within the set bounds, and turns power to the heating unit or AC compressor on or off as necessary.

The 150-200F AUTO Limit Switch is used with the Nordyne™ TEG/GAS fan coil unit to reduce electrical input power during temperatures that do not require heating or cooling. The switch automatically reduces electrical input power to 1/2 of the unit's full load when hot water temp is 200Deg and lower and cold water temp is 70Deg and lower. (Pressure switch can be used as a replacement for the pressure switch called out in E-STO-Nordyne™ indoor units.) This cut-off switch is a NEC requirement for gas fired outdoor condensing units during off season

The Nordyne 626513R 150-200F AUTO Limit Switch has been discontinued by the manufacturer. The following electronic components are sold with a limited 30 day warranty that is honored only through us. We guarantee these items to be free from manufacturer defect and will replace them at our expense if they are not working properly when you receive them.

MINI 150-200F AUTO Limit Switch. This product is a 1/3 duty cycle switch that is made of Class-A tin plated copper wire and electrical steal materials. The MINI is suitable for the 1/3 and 2/3 duty cycles on an immersion circulator.

The Nordyne 626513R is the replacement for the above mentioned limit switch. It has a 1/4" bushing for easy wiring and has an adjustable mounting bracket. This switch is rated up to 150/200F. This part will fit most Nordyne or Payne furnaces as well as other brands that are equipped with a 3 terminal 2" round auto reset switch."

The automatic reset thermal limit switch is designed for use as a manual reset or automatic reset device to provide protection against abnormal conditions which may occur in heating, ventilating and air conditioning (HVAC) systems where the combination of high temperature and high humidity is found. This device will automatically open when the temperature of the sensing element reaches above 150°F for longer than 8 seconds. This will clear the condition causing an overheat situation and reset when the ambient temperature is within 25°C - 30°C of its original setting.