Johnson Controls 8395 PRESSURE CONTROL WILL BE REPLACED BY P100CP-2C 425-325# OPENS ON RISE

425-325# OPENS ON RISE; AUTO RESET

FEATURES: Pressure control will be replaced by P100CP-2C 425-325# OPENS ON RISE; AUTO RESET.

The Johnson Controls P100CP-2C Pressure Control features the following: - 425-325# OPENS ON RISE; AUTO RESET; - 3/4" NPT male inlet connection; - 1/4" NPT female outlet connection; - 2,000 psi capacity; - Maximum pressure release. Get the control you need to ensure flawless operation of your compressor.

Pressure control will be replaced by P100CP-2C 425-325# Opens On Rise Auto Reset; Auto Reset; Adjustable Opening Pressure; Direct Mounted Actuator; Minimum Pressure Release; Adjustable Opening Time Delay; Large Range of Steps; On Rise Pilot Operation

The Johnson Controls 425-325# is a peristaltic brand with two stage type, designed for use in fresh water cooling towers. It can open on 450 PSI rise in supply pressure or on set point pressure. Available in 4 to 8 inch sizes in straight ports, angle ports, male threaded female threaded and male threaded.

The Pressure Control cuts off the motor of the 8395 if the pressure is low. When pump pressure rises, the Pressure Control automatically resets to start motor.

A two-position control valve with continuous pilot feature. Memory return feature ensures the pilot relights upon opening of manual reset.

These Johnson P100CP-2C pressure control valves are built for heavy industrial use. The water pressure is measured in pounds per square inch (PSI) through the P100 series pressure controls. Its automatic reset feature prevents constant running of external shut-off devices like air or electric solenoid-operated valves. The 8395 can be mounted vertically or horizontally, and its rugged 304 stainless steel construction ensures long operation.

Protect your home and business by monitoring temperature, humidity and dew points. The 8395 Circuit Monitor is designed to monitor up to seven block type sensor circuits and provide relays for use by control systems or contactors. The 8395 also provides a complete readout on the digital display and LED icons to indicate the status of each circuit and its common.

Pressure increases when the valve has been fully opened and increases Beyond the regulator setpoint.

The 8395 is a compact, two-stage, proportional control that increases or decreases pressure to the actuator based on the current/setpoint pressure. The second stage of the control has an inverse characteristic for ease of operation. Note: Field-supplied pressure regulator must be replaced with Johnson Controls® field-supplied Pressure Regulator, Part No. P100CP-2C before installation. Also see part number 8455 for additional controls.

The Johnson Controls 8395 is a manual differential pressure controller that is used to sense pressure changes in a carbon dioxide unit. It controls the operation of a safety relief valve which releases gas if the gas reaches unsafe pressure levels.

When a fire breaks out in a building, firefighters need a fire extinguisher that is reliable and will protect lives and property. Johnson Controls has been making superior fire-extinguishing equipment for more than 100 years. Fire-Extinguishing systems from Johnson Controls have been protecting elementary, middle and high schools, offices, restaurants, hospitals and residential buildings for more than 40 years.