Johnson Controls P100CP-166 325#Opn225#Cls SPST-Auto PrSwt

325#Opn225#Cls SPST-Auto PrSwt

Johnson Controls P100CP-166 325#Opn225#Cls SPST-Auto PrSwt

Johnson Controls' P100CP-166 325#Open225#Cls SPST-Auto PrSwt is ideal for use in dry, dirty or hazardous areas. It is rated at IP 54 protection against dust and splashing of water. The Johnson Controls locking plug connector design reduces the incidence of accidental disconnects. This item requires a special, non-keyed 120 VAC, 60 Hz locking plug since it is not compatible with standard 120 VAC GFI-type receptacles. It is UL 924 recognized and CSA certified to ULC standard C22.2 No. 164-M1984.

The P100CP-166 by Johnson Controls is a PrCnSwt switch. It has a weight of 305 lb(137.9 kg) and a voltage rating of 480 V. This DPST-NO 3P product is recognized under the NEMA standard type SWT, and it can handle up to 325 amperes. The switches feature a brushed, chrome plate finish and gold seal for added durability and longevity. Movement of opposing pair contacts is designed for normally open and closed positions. The switches operate at up to 200 deg c and feature overload protection and OPD terminal blocks.

This Johnson Controls P100CP-166 is designed to replace the following current relays: 117P4W, 127P7B, 119P5M. This miniature quick ship solderless snap action SPDT auto transformer control relay is rated at 12 VDC max voltage 125 mA, 10 VAC Max Voltage 500 mA. It has a coil rating of 325 ohms. The coil is connected in parallel with the load, whereas the control terminal is connected across the contacts of the load. The contact rating is .250" leads x .064" pin spacing DIN43650, .2R oh

Johnson Controls P100CP-166. The Johnson Controls P100 CP series has a broad relay output rating and a compact design. This general purpose current operated switch is designed with sealed terminations to protect against dust, dirt, light water spray and is rated for indoor or outdoor applications. A lever actuator is used to provide manual ON-OFF operation of the contacts.

A durable stainless steel paddle with a push button open/close control. The plastic handle is 16 inches in length and the overall unit is 2-1/2 in. in diameter and 8 in. in length.

The P100CP-166 is a 1NO/1NC three position, momentary push rod set point. This product serves as a switch for controlling the flow of liquids and gases. It is UL and cUL listed and it can be used in many applications such as: Liquid packaging equipment, Filling and storage tanks, Water treatment systems and Medical gas control systems.

Featuring a compact design, an integrated NEMA 4X electrical enclosure and a 16 gauge steel door, the P100CP-166 is ideal for use in rough environments. A 175 amp rating protects against arc flash situations. The all metal handle stays cool to the touch.

When a smaller device won't do--choose the P100CP-166. This rugged, oversized replacement solenoid can handle up to 225 amps and 1600 volts while staying cool and quiet. Put it in place of your buggered solenoid and breathe new life into your air conditioner or furnace. We suggest using this with a Honeywell C166 series thermostat.

The Johnson Controls indoor panel mounted thermostat with an on/off switch, adjustable 0°F to 140°F set point, on-off rocker switch, and manual override switch. The thermostat has a two wire terminal configuration with spade terminals.

With built-in power and control plus a Wi-Fi and smartphone app to monitor and control the thermostat and HVAC system from anywhere. The new Johnson Controls thermostat is easier to install, operates with great accuracy and efficiency, and helps you save time and money on your energy bills by matching cooling requirements with changing outdoor weather conditions.