TJERNLUND 36264 In-Forcer Fresh and Combustion Air Intake Fans, 80% Compared

COMMERCIAL COMBUSTION AIR INTAKE WI

Commercial combustion air intake fan, 80% cheaper than high end competitors' price, 4" inch size fans with diameter of 13.5" inches, 2" discharge duct.

TJERNLUND In-Forced Fresh Air Intake and Combustion Air Intake fans are designed for forced ventilation heating, cooling, or industrial process heaters. In-forced fans are mounted outside primarily within the structure and at no time come in contact with combustion air intakes; thus making it a safe installation.

The TJERNLUND 36264 In-Force Combustion Air Intake Fan prevents overheating and equipment damage in confined, poorly ventilated spaces. The unit's direct drive motor ensures reliable operation. Its 80% energy efficiency rating makes it extremely efficient and economical to operate. For use with gas furnace systems with up to 3 stage blower motors and forced air heating and cooling systems. Rated energy factor 0.80; Number of motors (HP) 1; Volts 208Y/120; RPM 1750; Air speed at 7 ft/sec (ASF) 4425; Air velocity nom (fpm)

For ventilation of a wood stove, fireplace, pizza oven or heating furnace. Fits into a 15"x15"x20" (38 cm x 38 cm x 51 cm) opening and delivers fresh air from outside into the room or house where it is installed. The in-flow fan can also be used as a combustion air intake too. With two fan speeds (high/low), automatic reset thermal overload protection and removable stainless steel mesh filters for safety and easy maintenance.

The In-Forcer Fresh & Combustion Air Intake fan significantly decreases the cost, maintenance and energy needed for forced air heating, ventilation and air conditioning in commercial properties. Its patented design modulates the volume of air drawn from outside by 80%. This allows ducted systems to be 20% smaller while delivering up to a 60% reduction in energy use. The result is lower operating costs and instant savings with lower installation costs!

In-Forcers maximize the performance of your fire by increasing the supply of fresh air to the flames. The In-Forcer Fresh Air Intake Fan uses an aerodynamically designed inlet to gently force a column of air into your fireplace. The In-Forcer Combustion Air Intake Fan is designed for use with gas and oil burning appliances. Both types of fans help circulate air around the room, eliminating smoke and heat from recirculating in the house. They also improve efficiency and fuel consumption by as much as 20%. All models are UL approved and CSA certified.

The TJERNLUND In-Forcer allows you to control your entire air intake system from one location. You get the fresh air you need for proper combustion and the optional forced air to help circulate hot air trapped in attic spaces - all from just one 4 inch inlet.