"Nibco" 127710 Nibco Pc-14S 1-1/2 STD Pressing Jaw for Pc-280, 1" x 1" x 1"

PC-14S 1-1/2 IN. STD PRESSING JAW FOR PC-280PC-14S 11/2" STD PRESSING JAW FOR PC-280

Nibco Pc-14s 1-1/2 Std Pressing Jaw for Pc-280, with heavy duty type material. Built to last longer, and designed to withstand everyday wear and tear. Nibco is the leading company in waterworks projects with a large variety of product and design choices.

The P-C-14S is one of two 1-1/2 size pressing jaws developed for the PC-280 press line. This L shape steel jaw has a 56° dog leg and a crushed rivet in the upper jaw to facilitate two different types of fabrication.

The Nibco PC-14S 1 1/2" x 1 1/2" x 1 1/2" Pressing Jaw for the Nibco PC-280 Greenhouse has a standard 1 1/2" opening and is used for pressing standard poly film against a pre-assembled frame.

The Nibco PC14S 1-1/2-inch pressing jaw is designed to fit and operate Nibco's PC280 press. This unit's primary purpose is to push pipe together without the use of fluid pressure. This heavy-duty jaw features a full circumference base that presses against the outside edges of the pipe and can effectively seal even 160 IPS material. When in use, this jaw should be mounted at least two inches (5.08 cm) above the 1" x 1" x 1" (25.4 cm x 25.4 cm x 25.4 cm) steel plating that forms part of

The Nibco PC-14S 1-1/2 in. x 1-1/2 in. x 1-1/2 in. pressing jaw provides a flattened area on the bottom that helps prevent crushing when placed against the clamped work. The inside of the jaws are threaded to accept 7/8" OD female pipe threaded fittings, and have a maximum recommended pressure rating of 60 p.s.i..

This Nibco 127710 Nibco Pc-14S is 1-1/2" wide by 1" high by 1" deep and fits the Nibco PC-280 PVC Press.

This is a Nibco PC-14S Pressing Jaw, 1 1/2" x 1 1/2" x 1".