Peco Controls 68671 "RemoteTempProbe60"" "RemoteTempProbe60""

"RemoteTempProbe60""

And for the first time in history, you can now get remote access to your temperature probe data using any Internet enabled device from anywhere in the world. The system consists of a network-connected transmitter with an internal lithium battery, a remote temperature probe with an internal lithium battery, and a Web interface that displays real-time data and provides email or text message alerts when temperatures exceed set thresholds.

Peco Controls 68671 RemoteTempProbe60"" The Peco RemoteTempProbe60"" is a replacement remote probe with no internal electronics. You simply slide the original electronics out of the housing and replace it with this new remote temperature probe.

The Peco RemoteTempProbe60"" is the perfect solution to keep your pool or spa at the perfect temperature. Adjustable from 60°F to 120°F, this remote temperature probe is able to monitor water temperatures from up to 300' away. The hinged piece allows you easy access for installation and cleaning, and the three-conductor wire is strong enough to withstand high water pressure.

The 68671 RemoteTempProbe60" from Peco Controls is a professional grade, 60" long temperature probe with a 6' cable that can be conveniently hid under carpet in the attic or floor joists. The sensor on this device is made of stainless steel and can withstand high temperatures up to almost 700 Degrees Fahrenheit without failing. The probe has two thermocouple wires that are enclosed in a flexible plastic sheathing. This allows the probe to flex during installation while still providing accurate readings.

RemoteTempProbe60""

Peco Controls 68671 "RemoteTempProbe60"" The Peco Controls Line Voltage Thermostat allows the user to control applications such as electric baseboard heaters and fan coils. The thermostat features a maximum 24-hour ON /OFF timer, switchable manual or automatic ON/OFF reset. A programmable 24-hour 2-stage ON/OFF cycle can be overridden by an instant changeover to manual mode at any time. An automatic temperature compensation (ATC) allows the thermostat to maintain temperature settings with minor fluctuations of ambient room temperature.

Peco Controls 68671 "RemoteTempProbe60""

A Peco Controls 68671 RemoteTempProbe60"" will allow you to monitor temperatures at up to 10 locations from any other location. It's easy to install and ideal for monitoring refrigerators, freezers and other storage areas. The unit is easy to install and sends temperature data via a phone line in both directions, so it can be used with existing equipment and applications. Order your Peco Controls 68671 RemoteTempProbe60"" today!

The Peco Controls 68671 "RemoteTempProbe60"" "RemoteTempProbe60"" is a quick-disconnect temperature sensor probe with a 6 ft. cable and a NEMA 5-20P plug. This probe can be connected to any control device that supports the NEMA 5-20P plug. These probes are used to monitor temperatures at remote points in the system where they can be accessed by the control device through the use of a wireless transmitter or data logger.

The RemoteTempProbe60"" allows customers to monitor the temperature of their food holding cabinets. The probe that is included with the cabinet can be placed in the cabinet and plugged into a receptacle at the back of the unit, providing an accurate and quick way to monitor temperatures without opening doors.