PennBarry 56348-0 Penn Vent Electric Motor (7151-3929) Zephyr Z102S, 1050 RPM 1.6 amps, 115 volts #

1/10HP 120V 1Ph Motor

Penn Vent Electric Motor (7151-3929) Zephyr Z102S, 1050 RPM 1.6 amps, 115 volts # *** 1/10HP 120V 1Ph Motor

Penn Vent Electric Motor 1/10 HP, 120V 60Hz 1Ph. This electric motor is 1/10HP (0.1HP) @ 115 Volts. It is designed for a ceiling fan or other electrical needs which use low to moderate horsepower applications. The motor comes complete on just one small single phase electrical circuit, new starter, electrical box (receptacle not included) and the correct wiring.

The 1/10 HP PennBarry 56348-0 motor is ideal for providing power to small equipment and business machines. The 120 volt, 1 phase motor features a permanent split capacitor design and a thermally protected start/run capacitor. This PennBarry 56348-0 1/10 HP low-speed industrial motor has a IP55 protection rating, .50 inch dia. shafts and coupling not included.

The PennBarry 56348-0 Penn Vent Electric Motor (7151-3929) is an electric motor used for venting portable fans and air conditioners. The motor is also used in conventional, direct drive, belt-driven fan applications. The Zephyr Z102S has a 1/10HP rating with Rotation of 1050 RPM. The motor has a single phase 115V input to create a 1.6 Amp output of current. This particular item weighs 24 lbs with dimensions

This direct drive motor from PennBarry is the perfect fit for Zephyr Z102 Industrial Dust Collectors. It features a durable 125V, 0.36 kW, 1/10 HP rating and a maximum operating speed of 1050 RPMs. The compact design offers easy installation to your dust collector and ensures optimal air flow delivery.

The Penn Vent motor is a 1/10 HP, 120V,440 rpm with 1/2" shaft and a 5/8” keyed shaft. The power cable is 6’ long with 3-prong grounded plug. This unit will accept 115V or 220V signals and has an ambient temperature range of -20°C to 35°C (0°F to 95°F)

Penn-Barry Motor Features: High efficiency, no external damper required, No load current < 0.2A, Insulation class F, Meet or exceed NEMA MG1 standards. For use with ventilation equipment requiring ventilating motors only