PennBarry 63752-0 Penn Vent Electric Motor (HF2K030N) 3/4 HP, 600-1750 RPM, 115 Volts #

3/4hp 115v 1ph ODP Motor

The Vent II fan runs on a 3/4hp, 115 volt 1 phase ODP induction motor. The motor comes with bolt-through mounting feet which are insulated and allow the fan to be run in either horizontal or vertical position. The motor is rated at 600-1750 rpm. Two new easy install mounting options are now available: (1) The Vent II cabinet can be ordered with factory installed fan motors and (2) a direct drive version of the fanframe is available so existing Vent I's can be retrofitted with direct drive motors as well.

This is a new Ventilation Fan Motor with Ball Bearings. It has a 18" Shaft with 3/4HP and 600-1750 RPM, 115v 1ph ODP. The mounting Holes are 2" apart.

Penn Vent Motor covers all your ventilation needs at a great price. A 3/4 Horse power motor, with a 1 Phase, 115Volt, ODP (Open Drip Proof) enclosed design with a NEMA open drip proof (ODP) cover for ducted applications. Specifications for this motor are: ½ Horsepower, 115 Volts, 1 Phase, 60 Hertz and an Open Drip Proof (ODP) cover with a NEMA configuration of VFD open drip proof (ODP) for ducted applications. These motors have been thoroughly tested to meet UL and CSA standards including tests for vibration

This Penn Vent RV ODP Brushless Motor is an excellent choice for operating fans, blowers, pumps, and other devices in a wide range of mechanical contracting applications.

The Penn Vent HF2K030N is a 3/4 HP, 115v motor that uses 1.0 amps maximum per start, and has a NEMA MG1-15 plug. It has a single shaft, ball bearing construction, cast iron frame, aluminum fan cover, and is CSA certified.

Designed for use with a positive pressure ventilation system, the PennBarry 63752-0 3/4 hp Motor is built to draw air through a hood or ceiling-mounted vent to help eliminate cooking odors. The unit features an aluminum blower wheel that is oil tight with a thermoplastic housing and comes with 115 volts and 60Hz on the H frame. It includes an automatic reset thermal overload protection, full-time HP rating set points, and an aluminum wire guard.

The Vent-A-Hood 63752-0 Penn Vent fan motor has a 3/4 HP rating and runs at 600 to 1750 rpm. It is 115 volts and 60 Hertz of single phase power. The motor has a 0.0 RPM no load speed with a maximum speed of 5500 RPM and continuous duty torque at 0.0845 Inch/Lb at 605 RPM.