PennBarry 63753-0 Ventilation Fan Motor 1/2" OD x 2 1/2" long, CW rotation from shaft end

1/5HP 115V 1PH ODP MOTOR

This Ventilation Fan Motor - 1/5 HP 115V 1PH ODP Motor from PennBarry works well for any ventilation fan or other low-amp motorized applications. It is suitable for commercial and residential use. For added safety measures, this motor is equipped with thermal overload protection and a switch control assembly. Offering superior cooling, it generates 0.6 amps at 115 volts power. It includes a #14 THHN lead wire and is rotates clockwise (CW) from the shaft end.

The PennBarry 63753-0 1/5HP 115V 1PH ODP Motor's design features an efficiency of 78.40% to minimize electric use while providing superior performance. Designed for continuous duty, the 63753-0 is constructed with a thermally protected winding with a thermal protector incorporated into the motor housing. Capable of operating at temperatures of up to 120 degrees Fahrenheit, this fan motor's thermal protection will trigger in the event of excessive mechanical or electrical overloading. A potted insulation system protects the 63753-0 from hurricanes and other high-wind conditions.

301 Series fan motors are easy to install and are commonly used for HVAC ventilation applications. These single phase, 1/5 horsepower, 115 volt motors have a full load rpm of 1625rpm and operate at a 1.05 Service Factor. Mounting configurations and accessories for these motors vary by shaft length.

These are PennBarry brand fans. These direct drive motor operates at 115 volts with a 1 phase, 60 hz, single phase input and output shaft rotation of clockwise (CW) . The maximum HP output is 1/5 HP. The mounting distance on center is 2-1/4 inches. The mounting hole diameter required is 5/8 inches. This motor has a thermal overload protection system with cooling fan and can tolerate an ambient temperature of 55 degrees Celsius  to 35 degrees Celcius..

The PennBarry 63753-0 1/2" OD x 2 1/2" long, CW rotation from shaft end Motor is ideal for applications such as ventilation fans. The Ventilation Fan Motor has a permanent split capacitor for constant torque and high starting torque. The motor has a frame size of 6.5 inches and weighs 2.5 lbs. It utilizes a thermally protected .63 Service Factor @ 115 Volts, 1 PH, 60Hz. It has a one piece plastic frame with aluminum open delta type enclosure with a 5 year warranty.

The Ventilation Fan Motor (Part# 63753-0) for 1/2" OD is a brushless, permanent split capacitor (PSC) fan motor. The motor has an outside diameter of 2-1/2" long and a width of 2-11/16". The diameter of the electrical internally threaded end is 1-1/4" while the shaft end diameter is 1/2"..."

For use with a variety of ventilation fans. This fan motor is 2-3/4 inches to 3-1/4 inches long and is made for 115-volt, single phase power. The warranty information is not included, however, there are no warranties expressed or implied.