Pfister P910022 Stem Diverter Can with Bonnet

RP STM DVT CAN W/BNT

The P910022 "Stem Diverter" Can with Bonnet features the RP Flo-200® Diverter Valve, and your choice of our 2-handle Bonnet Kit or 4-handle Center Handle. It includes the RP200, RP150, and RP SKT models. The RP Stem Diverter Valve is an experimental product that will not be released for purchase until it has been thoroughly tested against UPC requirements. Due to experimentation, this item is non-returnable.

The RP910022 Diverter Can with Bonnet from Pfister is designed to replace most 7/8" x 12" slip fit valves, excluding widespread tub spouts. The diverter can provides controlled water flow for your bath and shower mixer and accommodates 11/16" hose connections. The stem also pulls out and twists to adjust the water temperature.

This RP stem diverter combines the outstanding performance of the RP stem with a pre-assembled, bonneted, internal pop-up drain and slip joint for no soldering to create a complete assembly ideal for use in replacement bathroom faucets. The head is CAD plated with pure copper for superior corrosion resistance and smooth operation. This item can be used horizontally in deck-mounted faucets or vertically inside wall-mounted faucets.

Pfister Stem Diverter Can with Bonnet for PRV-G6, G6.2, and G12

The Diverter Can is an accessory used for the RP Series Pressure Balancer Shower Trim, but can be installed on any shower regardless of brand or model. When used with a handshower and a pressure balance valve or pressure balance faucet, the Diverter Can diverts hot water from bottom outlet to top outlet, providing temperature control at each outlet

The Diverter Can with Bonnet is designed for installation in 3/8" male threaded or barbed hose to divert the flow of the water to the right or left side of faucet.

PICK UP TRADES TO BATHROOM FIXTURES AND ACCESSORIES