Honeywell C6097B3028 PRESSURE LIMIT SWITCH W/MAN

PRESSURE LIMIT SWITCH W/MAN

Pressure Limit Switch. Pressure Switch Kit W/Manual Reset; Pressure Range (in. wc) 0 to 200; Body Material-

Honeywell Pressure Limit Switch W/Manifold - C6097B3028 is a factory assembled pressure switch with a molded PVC manifold and built-in pressure gauge. The pressure switch is factory pole-mounted and includes a reset trip indicator, brass lever to reset the trip indicator, 0 psi to 30 psi force rating. This unit’s dimensions are 5 x 4 x 2 in.

Honeywell Pressure Limit Switch With Manual

The Honeywell C6097B3028 Pressure Limit Switch with Manual Override allows you to monitor and cycle power to your pump when a set pressure is reached. While you may get limited functionality out of this product, it's a great way to make sure you know what temperature and pressure your tank is operating at all times.

The Honeywell C6097B3028 PRESSURE LIMIT SWITCH is a switch that senses when the pressure in a pressure vessel is too high or too low and automatically activates the safety relief valve to prevent damage. The pressure switch also has a manual operator that can be used at any time to provide extra protection when high pressures are detected.

A pressure-sensing switch with manual reset. It has a manually operable red lever that must be pulled up to relieve pressure and a green indicator arrow that shows the presence of pressure. The Housing, mechanical seal and electrical connections are contained within the switch housing. This is a safety device indicative of the presence of process pressure only. The sensing range is from 20-300PSI (138-2,070kPa).

Honeywell pressure switch, with manual actuation, 1/2-20 NPT threaded stem port(s), 0 to 150 PSI, 10 to 250 VAC, 1/4 full-load current, dimensions depends upon mounting method [Honeywell Product Code (SKU): C6097B3028], [Honeywell Catalog Number (SKU): C6097B3028]