MCDONNELL & MILLER 123543 120V PROBE TYPE LWCO FOR STEAM 1538

120V PROBE TYPE LWCO FOR STEAM 1538

Probe Type LWCO for Steam 1538 features 8.625” L x 1.000 O.D. probe and 2.875” male plug with positive locking lugs

For safety and convenience, probe type LWCO only (no steam 1538 or VW40 088) connected with a 4 foot relay extension or 4 foot pigtail for long distance use. Maximum distance between sensor and controller is 40 feet. The probe is factory adjusted to set points from -10 to +100F with a neutral point of -50F.

This 120V Probe Type LWCO is compatible with the following units: 1538, 1558, 1588, and 1728. It fits manually and mechanically actuated LT1300 & LTR1800 burners.

Probe type LWCO designed to be used on steam system probe test points and terminals. The test point and terminal must be steam leak free in order for probe to display an accurate reading. Probe is standard 1/4 inch NPT thread. The number (1538) is the part number for this manual actuated on/off switch.

For use with the L46 (3/8" O.D.) and L56 (1/2" O.D.) Type LWCO devicesThis probe incorporates a temperature sensor, a 3-wire, 23/25 kV A.C. insulated non-welding cable for connection to a 120V Type LWCO, and an External Float for driving the device clear of liquid level changes in process fluid. This probe is not recommended for use with neoprene or

This 120V probe is specifically designed to work with the EVO STEAM LWC.

Probe type water-cooled condensate overflow for steam. Standard feature on all New Holland, Case construction and utility tractors with enclosed water tanks. Directs cool condensate into the tank to prevent icing.