SPDT RELAY 12AMP,120V COIL REPLACES
A 120Vac coil relay 12 AMP. REPLACES-Honeywell 2545 X4222D1082. SPDT, NIckel Cadmium.------------------DC coil 12 AMP, Replaces Olfa T30 Series 2. Wire leads Solder or Crimp terminals for direct connect.#24 AWG maximum wire size min. 24 AWG, max 26 AWG(pink= 12 Amp).
The R4222 120 VAC 12 A SPDT Relay with COIL replaces obsolete Honeywell part numbers 2545R4221B, 2545R4221C and 2545R4225B. It replaces the following relays that are obsolete: Honeywell: - 2545-1T122-A ? - 2545-4221B ? - 2545R-4225B ?
The 2545 is a 120 volt, 12 amp SPDT relay constructed with an metal housing. It has a coil voltage of 12-volts DC and is used as a switch in AC and DC motor control applications. We offer assembly, testing, and complete documentation to meet the customer's application requirements.
This is a brand new generic 120v relay the works well for controlling lighting and other loads. It operates on 12vdc, 120vac coil, has a switching state, Non-latching, Form C- SPDT(2-Form-a).
The Honeywell 2545 12 Amp 120V SPDT Relay replaces the obsolete 2521 relay. This metal enclosed SPDT relay has a current rating of 10 Amps when operating in the ON state and 3 Amps when operating in the OFF state.
Honeywell 2545 series - 120V 12 amp switching relay with one SPDT set of contacts, and one SPST set of contacts. Contact rating 1 American Wire Gauge (AWG) @ 250VAC/12A resistive only. Contact resistance: 2.0 milli-ohms max at 25VDC coil voltage, 5 milli-ohms max @ 50VDC coil voltage. Plunger Guide Spacing: 2.54 inches. Actuator length: 16.7 mm (0.65 inches). Environmental Operating conditions: 32° to 104°F (0.50
The Honeywell 2545R is a SPDT relay with a 120V coil. The Honeywell 2545R4221-1082 has no terminal strip connections and the contacts measure 2.2mm x 6.6mm. This Honeywell 2545R Relay has an operating voltage of 24 VAC and a contact rating of 10A at 120V DC and the maximum switching current is 100 mA.