Honeywell 2545 General Purpose Relay with SPDT Switching

SPDT RELAY 12AMP,120V COIL REPLACES

SPDT Relay, 12A, 120V Coil. For use with Relay Base 2540.

The Honeywell 2545 is a solid-state, general purpose line-voltage, momentary SPDT snap-action switch with 12 Amp, 120 VAC coil that provides momentary switching for 120 VAC loads up to 600 Watts. This product can be used to replace various applications of the D3015B1221-56, D3015D221-56 Relay

The Honeywell 2545 General Purpose Relay is used to switch 120V AC or DC loads. This SPDT relay has a 24 VDC coil and 12A coil current For use with 18-22 AWG wire.

Wiring an occupancy sensor or delaying an electrical task until a preset time in the future often requires installing a Honeywell General Purpose Relay. This rugged relay is designed for use with connected loads up to 20 A at 120 VAC. It features screw terminals, a 12-amp SPDT (single pole, double throw) coil, and steel construction for durability

The 2545 is a general-purpose relay designed to switch lower loads and currents. It can be used either normally open or normally closed. When in use for normally open applications, this relay has a coil current of 12 amps, 120V at 10% duty cycle. When in use for normally closed applications, the coil current is 8 amps, 120V at 10% duty cycle . At 50% duty cycle, the coil current is 6 amps. The contacts are rated for AC current only, 3 watts @ 120 VAC resistive load (switch) and 3 watts @ 120 VAC inductive load (relay).

The Honeywell 2545 2-Pole General Purpose Relay Coil is a single throw 120 Vac relay with a 24 V coil. It has a circuitry interruption of 12 A at 0.02 mA to contact closure.

The 2545 General Purpose Relay with SPDT Switching can be used in a variety of industrial and commercial applications. Use it to control lighting, fans, pumps, motors and other inductive loads.