MAXITROL R600Z-3/4" R600Z-3/4" REGULATOR ZERO GOVERNOR REPLACES R6

REGULATOR ZERO GOVERNOR REPLACES R6

The MAXITROL R600 Z regulator zero governor replaces the R6 in a model R600 air compressor. This part is fully compatible with R600 compressors made before 1999 and has no effect on the unit's light switch. You will receive one zero governor, an O-ring, and instructions on how to install/use this equipment. The valve in your R6 air compressor has broken or needs to be replaced. You've looked around the internet and you see that it costs about $

The MAXITROL R600Z-3/4" REGULATOR ZERO GOVERNOR is designed to replace the original R6 set valve. The R6 valve is also known as a 3/4 MPR governor that is used on any 3 turbine engines. It will not work on 1 turbine engines. However, the R600Z-3/4" REGULATOR ZERO GOVERNOR will run the 3 turbine engines at full speed.

This Regulator Zero-Governor incorporates a precisely machined brass rocker featuring seven large diameter adjustment screws and large, hand-ground adjusting screw locking nuts. The “Zero” Governor has been designed to provide the finest possible fuel regulation control with any R6 burner. The 7/8" diameter main valve outlet allows use of #1 or #2 burner tubes and it is offered with the newer 12" Pro-Venturi mix tube.

The Maxitrol R600Z-3/4" R600A-3/4" Regulator Zero Governor replaces R6 for model number HVR-600V, HVR450SM, HVR450V, HVR230V and all original four wire modulation models. The R600Z-3/4" and an appropriate discharge pressure relief valve, are designed to perform on gas heating appliances.

The new R600Z-3/4" is a direct replacement for the old regulator R6 and makes shutting off your propane tank easy. This rugged device is built on a cast iron base with cast brass handle. It has a gauged pressure gage which tells you when your tank needs to be refilled. If you'd like to learn more about our heavy duty zero governor, read on!

Direct replacement for R6, regulator zero. Designed to regulate and control the flow going into your tank to keep a steady pressure. Connects to the inlet of an accumulator or a pressure tank (see related products). Maxitrols regulators are designed to be used with propane and natural gas. Please identify which gas you will be using before ordering!

This is a FORZA/MAXITROL R600Z-3/4" reducing regulator for the ATV that replaces the Charles Regulator # R6. Also used in other applications by several different internal component manufacturers. 171555 (universal) forza pump brackets (R8788 & R272006) - arm = 3-1/2" high x 14" outboard Forza Governor bracket 83103012 or Flange Assembly P-16R and adapter plate 83103