Honeywell 2610 R8182H-1070 TRIPLE AQUASTAT RELAY W/REMOTE SENSING BULB HIGH/LOW/CIRC/CADCELL 120V INC 166386

R8182H-1070 TRIPLE AQUASTAT RELAY HONEYWELL W/REMOTE SENSING BULB HIGH/LOW/CIRC/CADCELL 120V

SMALL GENERAL ELECTRIC R8182H-1070 TRIPLE AQUASTAT RELAY HONEYWELL W/REMOTE SENSING BUL B HIGH/LOW/CIRC/CADCELL 120V

The Honeywell 2610 R8182H-1070 TRIPLE AQUASTAT RELAY W/REMOTE SENSING BULB HIGH/LOW/CIRC/CADCELL 120V INC 166386 is a relay for use with hydronic systems with a remote sensing bulb or at sensor temperature. This triple aquastat relay has three independent remotely sensing lines for heating, cooling and circuit. Additionally, it has the ability to control a heating element at 180 degrees F. The Honeywell 2610 R8182H-1070 TRIPLE AQUASTAT RELAY HONEY

Honeywell R8182H-1070 TRIPLE AQUASTAT RELAY WITH REMOTE SENSING BULB HIGH/LOW/CIRC. 120VAC IN -- 166386

The R8182H-1070 Triple Aquastat Relay Honeywell with Remote Sensing Bulb is designed for wet - dry applications where lamp dimming and switching is desired. The sensing element is compatible with all wattage and voltages of the lamp types listed. The remote teed sensing element has a sensing distance of 0.75 inches to 6 feet (0.20 to 2 m) from the sensor element on a vertical or horizontal plane. This unit has been revised to operate on 120VAC or 277VAC at 50/60Hz ambient temperature. To convert from 120VAC to 277V

Experience a level of clean that only a Honeywell can provide. The Triple Aquastat Relay R8182H-1070 has three switch points to control water temperature and allow for more consistent performance for your pool and spa systems. Plus, this accessory uses remote sensing technology which means you don't have to sacrifice the convenience of a remote controlled system.

The R8182H-1070 TRIPLE AQUASTAT RELAY by Honeywell is a normally off device. This device is protected against overcurrent. The 4 pin connector on this relay has a current rating of 0.25 amps at 120 VAC and 0.12 amps at 230 VAC.

The 2610 R8182H-1070 relay from Honeywell is the replacement for the following (but not limited to): A6-ACR0D, A7-ACR1/2/3, A9-ACR3. This device operates as a solid state, triac controlled, remote sensing, room temperature sensor. A three way high/low/circuit demand with temperature compensation on heat to 24 deg C and cool to 10 deg C in both heating and cooling mode. The contact rating is normally open and it closes at 6 VDC. It includes an external sensor and separate remote