Honeywell 2637 Heavy Duty Switching Relay, 24 Vac, DPDT (one power and one pilot duty)

DPDT(1-SPDT 12AMP POLE-1SPDT PILOT

Switching Relay, 24 Vac, DPDT (one power and one pilot duty)

Industrial-duty switching relay has nickel-plated brass terminals, 24 VAC/VDC SPDT (Single-Pole Double-Throw) pilot duty contacts rated 3 amps at 125 VAC, designed for use in industrial controls, and handling voltages to 600 VAC.

The Honeywell H2637 600ma, 24vac, DPDT (one power & one pilot duty) heavy duty switching relay is used to select ON & OFF functions.

The Honeywell H1SB2637 Heavy-Duty Switching Relay is designed for switching motors, fans, or other inductive loads of up to 12 amps. This relay features a stud type SPDT actuator which can withstand high-impact use. The DPDT pilot actuated contacts can carry a maximum of 254 volts AC/DC.

This DPDT switching relay has high current rating (1 pole,12A) and it can withstand voltage surge up to 1500V.

A heavy duty, general purpose switching relay designed for switching inductive or resistive loads in conjunction with other solid state controllers. It is a single pole, single throw, double pole double throw (SPDT)SCR-based relay designed for use with 24 VAC power. It has no pilot control and contains two sets of contacts.

The 2637 has the same ruggedness as the rest of the Honeywell switches, plus pilot control for remote control of a 6000W heater. This 24VDC air relay is used to control a heating load with 24 volts and is DPDT, one power and one pilot duty. The relays may be mounted in any position and are suitable for supply voltages up to 250 Volts (AC or DC). They are ideal replacements for use where devices must be switched under load i.e. motors or boilers etc