Honeywell 2656 , Inc. Control Center, SPDT, 120 VAC.

FAN CENTER 120V PRIMARY W/SPDT RELA

The FAN CENTER 120V PRIMARY W/SPDT RELA is a Fan Center that employs SPST relays to control up to 36 fan loads from a common FAN CENTER 120v primary. Most electrical loads may be controlled by the FAN CENTER, i.e. lights, heaters, fans, etc. SPDT relays are used to provide on/off control of the electrical load. The wiring diagram on the attached product summary should be followed for proper installation. The center is shipped with #12 wire jumpers installed between the two SPDT relays. This is recommended for

The Honeywell Incontrol-Aire Fan Center 120V Primary is suitable for use in residential or commercial heating and air conditioning systems. Thermostat controlled, this fan center is used to connect the airflow and power required by a room air distribution system. Its control can be mounted in line, or vertically or horizontally as needed. This item contains a primary contact rated at 120 VAC and 15 amps, a secondary contact rated at 120 VAC and 10 amps, and an auxiliary contact rated at 120 VAC and 5 amps. This model also includes screw terminals for wiring into a load center. The Fan Center features an

The FAN CENTER is a fan control center that you attach to your existing system, which controls up to 3 fans instantly. With four wire connections provided, this is easy-to-install in most existing systems. Includes one 24 VAC power transformer and 3 momentary SPDT switches allowing you to control either a single speed or "off" position for each connected fan.

SPDT Relays 120VAC Primary 50/60Hz

The Honeywell Control Center With SPDT Relay is designed using a Honeywell Microprocessor. Compatibility with Honeywell digital and non-digital sensors, as well as third-party devices, makes this device suitable for most applications in the central monitoring area. The Control Center features an internal freeze protection function that adds to its robust durability. It can withstand temperatures of up to 32 degrees F while in the off state. This unit is equipped with Honeywell's patented Flush Guard Technology, which protects against false alarms caused by particulates from dust to pollen. A master reset that will return control center back to default values while remaining

Finally a replacement for the control center of many discontinued residential products! The Honeywell 2656 is a single pole, double throw switch that fits more Honeywell and other brands of fans and air handlers.

CSA Intertek UL Cat. III 600V AC, DCL Glowbar & SPDT Aux Relay Standard