United Aqua Group 002084F Model 2100-4001 Pilot Nat. IID

NatGas SparkPilotAssembly

The Aqua Group Pilot NatGas SparkPilot assembly is a packaged appliancethe gas mixer, pressure regulator, and control pack assembled and tested prior to shipment. Designed for use with Aqua-Hot NGX, NGQ, NGK and NGQT natural gas log sets.

A 6" NG spark pilot assembly kit with thermocouple. The pilot operates at approximately 800°F (427°C). Includes a flame rod, thermocouple, thermocouple strain relief, two-piece end cap, spark screen and a venturi. Optional: pilot operation without the spark.

The Aqua Group 2100 Nat Gas Water Heater pilot assembly is a "2-in-1" hot water heater system that includes both the base and ignition for natural gas operation. This pilot assembly is designed to be used with the Aqua Group 2100 Series gas water heater. It features an internal thermocouple to detect failure of the pilot flame and water temperature settings below 125 F. This model comes with an NPT threaded connector for installation into the gas supply pipe.

For a variety of natural gas applications. This one-piece assembly has 2 spray patterns: pilot version for any type of natural gas application, and nat pilot for use only with natural gas. The valve assembly is porcelain dishwasher safe and delivers a 360 spray. The water valve is brass; the 1/4 in. NPT gas connection is stainless steel; and the nylon spray tip is removable.

This thermocouple assembly is a pilot flame ignition device used in gas and propane appliances. This product is suitable for use with natural gas and propane.

Popular pilot assembly includes all components except gas control and exhaust mechanisms. Attributes include . 75" axial exhaust port, 7mm pilot, stainless steel spool, adjustable fuel pressure regulator, stainless steel fuel filter, and platinum insulated throttle cable.

The Aqua-Pilot Water Heater for Octagon Modular gas heaters offers safe water heating with no standing pilot. The Aqua-Pilot operates with a standing pilot flame, the preferred method for safety. It can also include a PTR4 Regulator with ThermaSTOP device and an independent manual air supply to provide hot water without a flame or spark present, as required by the 2009 Vermont State Plumbing Code. Featuring easy installation and operation, this system provides peace of mind in today's modern home. This system is designed for use in NatGas Modular Gravity Intakes only and is NOT to