Redington 710-0001 10NL7 120V NonResetLeadsHourMt 10NL7 120V NonResetLeadsHourM

10NL7 120V NonResetLeadsHourMt

Our 10NL7 120V NonResetLeadsHourMt is a quality, top-rated product for a fantastic price.

The Redington 710-0001 10NL7 120V NonResetLeadsHourMt is a 110/120 VAC, 60 Hz motor that transfers 33.3 Watts out to the motor windings and has a Shaft/Hub Diameter (in.) of 1 3/16? . It has a Lead Length (in) of 45?. The Frame Size Class is A. The Shaft Style for this 10NL7 120V NonResetLeadsHourMt is Covered.

The Redington 710-0001 10NL7 120V NonResetLeadsHourMt is a large wall oven that measures 26.25" Height x 24.75" Width x 23.44" Depth. It weighs approximately 115 lbs.

The Redington 710-0001 10NL7 120V NonResetLeadsHourMt

Tachometer-s with 10NL7 120V NonResetLeadsHourMt to connect to a Process Supply 7/8" diameter, 38" cable for operation from a 60 Hz power supply. Compatible Meters: ATD-3012A, ATD-3021A, ATD-3022A, ATD-3023A, ATD-3024A, ATD-3025A and many others.

The Redington 710-0001 10NL7 120V NonResetLeadsHourMt has a 1/10 HP motor with a 115/230V single phase two wire connection. The Open Circuit Break Capacity of the motor is 60A, breaking capacity at 1/10 HP and the Maximum Continuous Current of the motor is 6.6A. The Motor Full Load Current of the unit is 6.6A, and the Full Load Torque is 1.4 Ft. Lbs.,while having an IP55 protection degree and an NEMA size of C-13. It measures 14 x 13 x 12

The Redington 710-0001 10N 7" 120V NonResetLeadsHourMt is equipped with a 1 horsepower permanent split capacitor (PSC) motor that gives you the power you need to cut through rugged steel and other metals. Its ¼turn zero-clearance front swedge cuts up to ¾ inch material and cuts angles and bevels up to 90°. It also has a ZCI (Zero Contact Interference) narrow kerf tooth design for greater accuracy, an ergonomic side handle for comfortable operation at any angle and more.