Rheem 42-23116-01 24V SPST-N/O Sequencing Relay 24V SPST-N/O Sequencing Re

24V SPST-N/O Sequencing Relay

The 24V SPST-N/O Sequencing Relay uses PNP power transistors to switch on a load (i.e. solenoid) up to 50 Amp at 240VAC. Features include N/O basis, 1 Form A relay, UL recognized.

The RHEEM 24V SPST-N/O Sequencing Relay allows the user to sequence additional outdoor air units (OAU) as the system demand increases. The RHEEM SPST-N/O Sequencing Relay is extremely useful in systems that have integrated chilled water and outdoor air units such as those common in many supermarkets. In other words, this relay is used to sequence additional outdoor air units when they are not needed.

The Rheem 42-23116-01 is a 24V SPST-N/O Sequencing Relay. The relay features a 24V Coil, Thermal Protection, UL Listed and CSA Certified.

The CAA42-23116-01 24V SPST-N/O Sequencing Relay is used in various 24VAC applications such as air handling units, electric blankets, radiant heaters and cooktops. Features a high heat, high volt, low current rating.

This 24 V single pole single throw (SPST-N/O) relay is magnetically latching. It employs a snap action switch for switching and an output that will activate in either the ON or OFF position. It has a coil resistance of 6 ohms, min, at 20 C (@ 25 VDC). The maximum voltage between bobbin and coil terminals is 160VDC. Auxiliary contact: SPDT-NO(Min Switching current 10mA).

Locking Relay - Single Pole, Single Throw (SPST), No-Off/On Sequencing Switch, 18 Amp Contact Rating, 24VAC/VDC Operating Voltage Range, 3A Maximum Circuit Amps Applied, 0? Coil Resistance, 1.35 T x 0.47 W x 1.56 D Inches

Simple and easy to wire, the Model 42-23116-01 24V High/Low Circuit Combination Relay is a programmable component that may be used to control the start and stop of external electronic devices for a variety of uses.