"0.30""PF SPST PRESSURE SWITCH"
This "0.30""PF SPST PRESSURE SWITCH" will fit multiple products manufactured by Rheem, and other brands of central air conditioners, refrigeration equipment, gas fireplaces and stoves. This "0.30""PF SPST PRESSURE SWITCH" is used on units that are controlled by a combination of the pressure switch and and indoor thermostat.
Rheem 42-24194-82 "0.30""PF SPST PRESSURE SWITCH"
0.30""PF SPST PRESSURE SWITCH
Pressure switch, "0.30" [10 mm] pf spst, Pressure range: 0-60 psi [0-4.2 bar], For gas water heater front burner, Includes a pressure regulator with an internal sight glass, Mounting hole: 1/2"" [13 mm] diameter with 1/8"" [3 mm] dia. pipe thread
Rheem Pressure Switch. Rheem Pressure Switches Are Used On Rheem Furnace Models 42-H/U,42-H2O2,50-H/U,62-G/U,62-RSC/V.
This Pressure Switch is designed for use with Rheem brand water heaters. It has a Factor of Safety of 2, and comes in an industry standard square body.
A pressure switch is an electrical component used to detect changes in pressure. The sensing element of a pressure switch usually consists of a flexible metal diaphragm sealed between two contact plates. The detection principle of a pressure switch is that the separating force between its contacts depends on the pressure applied to the sensing element. In particular, there is a minimum separating force (gap) at which the contacts are opened. This minimum gap is adjustable by varying the deflection of the spring presses or preloading one or both contacts against each other.