INDUCER BLOWER GASKET
DeWalt Rheem 68-22850-01 Inducer Blower Gasket, For Use With: Rheem Item
This genuine Rheem part is a factory installed item and it's the inducer blower gasket for your model.
The Rheem 68-22850-01 Inducer Blower Gasket is an important replacement part for the brine pump. This item is put into use during the brining process which adds flavor and preserves food.
Rheem 68-22850-01 Inducer Blower Gasket
This Inducer Blower Gasket is the gasket used in the sash of Rheem units which contain an inducer blower. If you have a Rheem furnace or air...
The gas furnaces Burner chamber must be free of any obstructions through the entire length of the burners or damage may occur to the Inducer Blower Gasket where it seals against the side wall of the burner chamber. Refer to page 5-2 of this manual for complete Inducer Blower Gasket replacement instructions. An Inducer Blower Gasket MUST BE INSTALLED PRIOR TO PLACING THE FURNACE INTO SERVICE! Use of a NON-rated gasket will result in improper cooling and possible compressor failure.
The Rheem 68-22850-01 Inducer Blower Gasket is the small black gasket located behind the blower housing. It is used to prevent dust and dirt from entering the blower housing in the gas furnace.