Rheem SP20305A PILOT ASSEMBLY KIT-NAT GAS PILOT ASSEMBLY KIT-NAT GAS

PILOT ASSEMBLY KIT-NAT GAS

The Rheem SP20305A PILOT ASSEMBLY KIT-NAT GAS PILOT ASSEMBLY KIT-NAT GAS is a genuine part manufactured by Rheem. Providing your water heater, boiler, tank or other type of system with furnace parts from Rheem, a brand you recognize will give you the most value for your money. Water Heater and Boiler repair parts are available at Parts Town. Order now! One minute online ordering and same day shipping available!

SP20305A PILOT ASSEMBLY KIT-NAT GAS This XANTX2 Series Natural Gas Pilot Assembly Kit is designed specifically for use in the following series of gas water heaters: GN, GH, NH. Note that this kit will not work in models beginning with CNG or NG. Replace a defective or worn model GN 0306, XCYY0306 PILOT ASSEMBLY KIT-NAT GAS pilot assembly. Provides a replacement Xantrex natural gas power conversion system for use only on residential natural gas water heater models which include a natGas Blower Power

Compatible with the following Rheem models: 2CMR2BVC N/A 115 Btu/hr Natural Gas Condensing, Auxiliary Gas SP20305A PILOT ASSEMBLY KIT-NAT GAS NAT GAS

The Rheem Pilot Assembly Kit-NAT GAS is designed to enhance bath and kitchen comfort. The kit allows for the easy installation of an Rheem gas control with a Programmable Logic Controller (PLC) interface. This assembly makes upgrading a home's system simple by allowing for turn on and off of gas flow with ease remotely from a smart phone. The PLC interface monitors gas burning efficiency and prevents gas waste which allows for the system to ran at maximum efficiency on natural gas or propane. For your safety, the Rheem pilot assembly kit exceeds all product standards set forth by the Department of Transportation (

The Rheem SP20305A NAT gas valve is a pilot assembly kit. It is compatible with Rheem models that use natural gas only.

Pilot assembly kit for Rheem Model No. SP20305A. Natural gas. Kit contains pilot assembly, heat sensor, and thermocouple. Product Type: Pilot Assembly Knob Style: Round Box Quantity: 1Voltage: CM

The Rheem Natural Gas Pilot Assembly Kit is used with the RPB04 series natural gas condensing water heaters and is designed to ignite gas from remote pilot assemblies. The kit includes the necessary provisions for installation such as a base, condenser pilot tube, and thermocouple. The components are not replaceable and must be installed together.