YORK S1-02425911700 RELAY,CNTRL,24V,50/60 HZ,3PST RELAY,CNTRL,24V,50/60 HZ,3PST

RELAY,CNTRL,24V,50/60 HZ,3PST

The YORK S1-02425911700 RELAY,CNTRL,24V,50/60 HZ,3PST is used to control electrical switches. It controls the circuit breakers which are connected to live electrical wires.

S1-02425911700 - RELAY,CNTRL,24V,50/60 HZ,3PST RELAY,CNTRL,24V,50/60 HZ,3PST

This item is for a relay. The relay is mounted on an aluminum heat sink, integral heat sink fins increase surface to dissipate heat generated by thermal overloads. This unit has 3 poles and 3 positions. It can handle 240 Vac, 50/60 Hz at 0.5 A resistive load; It actuates the points only while there is control power applied to the coil.

A relay is a switch. It switches electrical circuits on or off. Unlike a mechanical switch, a relay operates without moving parts. A relay has 3 electrical terminals: the common terminal (C), the normally-open terminal (NO) and the normally-closed terminal (NC). When an electric current flows through the common terminal into the coil of the relay, it becomes magnetized and closes the normally-open contact, connecting one or more other circuits to complete an electrical circuit. Power for the coil is provided by current flowing through the normally-closed contact.

Relays, Controllers and Electronics! Here at York we can satisfy a wide variety of electrical needs. You'll find a wide selection of relays from basic microprocessor relays to contactors, phase angle controllers, frequency drives and solenoid valves. We have a full selection of electronic timers and controllers for lights, pumps, fans and other equipment. We carry hard-to-find specialty products such as power supplies and loop transformers. We also carry electronic components such as resistors, capacitors and inductors.

Optimized for reliability, the relay uses no movable parts, wiring terminals are designed for easy assembly and repair, and the unit is sealed against dust. It features three-position operating controls with built-in fault indications. The relay accepts 1- to 10-amphdc electricity, provides spark-control devices for high voltages up to 30 kV, handles currents up to one amp at 24 V dc.

Relays are used to control electrical devices by actuating the load through the use of an electromagnet. The relay is one of the most widely used electromechanical devices, and may be found in industrial, household, automotive and commercial applications.