YORK S1-02427542000 RELAY,CNTRL,24V,50/60 HZ,DPDT RELAY,CNTRL,24V,50/60 HZ,DPDT

RELAY,CNTRL,24V,50/60 HZ,DPDT

York S1-02427542000 RELAY,CNTRL,24V,50/60 HZ,DPDT (CONSUMER ELECTRONIC REPAIR)

The YORK S1 24V 50/60Hz DPDT relay is used in 2-wire control circuits that protect against current overloads due to shorting or non-polarized Mc...

The S1 Series Relay, Control, 24VAC/DC, DPDT is a normally-closed SPST-NO transistorized relay with two switch positions.

The S1-02427542000 is a control relay with auxiliary contacts for double-throw applications. This relay includes 24V DC power supply. It comes complete with double-bolt mounting for easy, fast installation.

This Relay with Double Pole Double Throw is a member of a complete line of relay solutions from York Controls. It is a double pole with a double throw contact configuration. This contact style provides more positions than the SPDT style contacts by having 4 positions rather than 2.

The YORK S1 Relay Controller is designed for use with the YORK S1-02420458000 and YORK S1-02420460000 control panels. The York S1 relay controller is used to connect optional 24VAC-0 solenoid valves and other devices to electric circuits.

Auto-reset relay, single lever control for dual lighted pushbutton with 2 and 2-1/2 amp contacts (these contacts require load resistors; must be ordered separately) for UPON/OFF and pushbutton operation with 24 VAC or 24 VDC with 8 amp contact rating. 20 amp continuous current rating at 240 VAC, 5A at 240 VAC, 10A at 125 VDC, 20A at 24 VDC. Operated by magnetic control. 11-1/2" x 10" x 1-3/4"H overall including terminals and knobs. Turn knob clockwise

The relays are used to switch AC/DC or DC/DC circuits. These relays are suitable for use where the switching voltage is 50VAC or 60VDC.

Fits into standard single pole switch box. When operated by paddle type actuator, the contacts are normally open. When operated by wall push button, the contacts are normally closed. The high power relay operates at 0.3 to 30B/A at 24VDC and 0.2A at 120 to 240VAC for maximum contact rating.

The S1-02460W is a relay with N.O contacts, mounted on a ¾ inch wide terminal strip. Voltage rating 240 V AC, contact rating 0.5 A, coil voltage 12 V DC, coil current 2 mA maximum. Operating frequency 60 Hz. Release time standard 2 sec., short time 1 sec., long time 10 sec. Power level wattage 14W maximum. 2 poles 2 coils normally open

The YORK S1 series of electronically commutated blowers feature a rugged construction. This fan is suitable for demanding industrial applications in which the unit must run continuously or at a fixed speed for long periods of time.

If the item is defective or is missing components, then you are eligible for a refund or a replacement! If you are missing parts, then please contact the manufacturer to secure the parts before returning the product.