YORK S1-02532771001 FUSE,DUAL,TIME DELAY,600V,0.50AMP FUSE,DUAL,TIME DELAY,600V

FUSE,DUAL,TIME DELAY,600V,0.50AMP

The FUSE,DUAL,TIME DELAY,600V,0.50AMP has a current rating of 0.50A and a voltage rating of 600V.

The FUSE,DUAL,TIME DELAY, 600V ,0.50AMP from YORX is a stocked item and ready to be shipped to you today.

The Fuse,Dual,Time Delay 600V series time delay fuse is designed for use in the products using the standard class of over-current protective devices.

Get the right power for your device with this dual time delay fuse. It's 600V voltage delivers 0.50 Amp AC current and is used in a variety of appliances and lighting fixtures.

Our fused 600V 0.50A dual time delay protective device is manufactured to comply with IEC/EN 60947-5-1, UL489. The fuse has a 2.4mm wide by 8.0mm high glass body with silver alloy contacts and phosphor bronze spring. Blown fuse is indicated by the transparent glass body turning red when the current reaches the trip current of 0.6A, or any other value defined by the time delay characteristics of the device. This makes it suitable for use in lighting circuits, safety circuits, appliance circuits, control circuits, tripping of motor starter circuits etc

High Voltage Time Delay Fuse 0.50 amps at 600 volts 5" Long 1/4" Diameter Nickel Chrome Plated Red Fiberglass Encapsulated Glass Filled Nylon Molded Case, PVDF Insulation

The York S1-02532771001 is a 600V, .5A replacement time delay fuse. This dual element time delay fuse has a .5A current rating with a 500mA, 500msec trip characteristics.

This Dual Time Delay Fuse is designed for use with air conditioners, heat pumps, and other electric motors. The Dual Time Delay Fuse features a 2-second delay that limits short circuiting, arc fault protection that helps reduce damage due to arcing, and thermal spring construction that prevents the fuse from fracturing when the current flow exceeds the rating.

The D33006-L0 series 6KA time delay fuse is packaged in 6.3x38.1mm glass pack with precision single hole terminal, aluminum alloy top cap with two screws for easy replacement, and stainless steel bottom cap to protect the hard wire terminals. The D33006-L0 series fuses are primarily designed to protect 0.37 to 5.0mm² class II T/M applications. These Time Delay Fuses have very good safety performance up to 600VAC.

The 600VAC series are UL listed, lead-free time delayed fuses with fast acting contacts. These devices are intended to provide protection against circuit overload or short circuits.

A time delay fuse is a safety device used to reduce fire hazards in electrical equipment.