York 144833 S1-025-41089-000 "TXV 3/8x1/2 ODF R410A 30""CAP"

VLV,TXV,3/8 X 1/2 ODF,85.0 PSIG,SPORLAN

p> The YORK 144833 S1-025-41089-000 TXV 3/8x1/2 ODF R410A 30"CAP is a direct replacement for a current or previous model YORK condenser. It operates at a standard pressure of 85 PSIG to produce a cooling output of 25,000 BTU. This unit has been tested and certified by York to fit properly in any YORK equipment.

The York 144833 S1-025-41089-000 "TXV 3/8x1/2 ODF R410A 30""CAP" is a Repair part for the York Rheem, Ruud Carrier, Bryant Carrier, Coleman Carrier H.P.A.F. 1/4 And 15 Tones Gas And Electric Furnace Regulators And Coils Venting Systems. This part can be found in many different models of gas & electric furnaces.

Remodel your bathroom with the York 3/8? x 1/2? Off-the-Side (OTS) Carbon Dioxide Expansion Valve with a 30 PSIG, Medium Pressure Limit Control and Stop 150 PSIG. This expansion valve is designed to use R 410-A refrigerants and a SPORLON®9FC9B9AF1P02 evaporator coil. This expansion valve may be installed horizontally in a York OTS recessed installation with standoffs.

Filtration, SPORLON polyurethane air filter, Steel enclosure with crimped end caps, Stainless steel spring, Stainless steel seal face.

This new development uses a side discharge filter version of the popular S1 series. It features a temperature control system that can be adjusted according to the manufacturer's recommendations for a given size, capacity and ambient temperature of the evaporator coil. The evaporator fan motor has a three-prong plug and comes with an ungrounded cord which is recommended for use by York. Features include: - Service port for drain pan entry.- Flow rate: 28 gpm.-- Pressure: 85 PSI.-- PSIG: Model -- Model: YRKV025491089000 907-291

R-410A refrigerant

Designed with the contractor in mind, York's line of multi-port valves are certified to exhibit excellent performance, superior to prescriptive requirements. These valves are suitable for use in packaged terminal air-conditioners or multi-port valve modules in split systems. Available in various configurations, they are compatible with R410A refrigerants.