York 144992 S1-025-41291-000 460/575-230V 175VA Transformer

460/575-230V 175VA Transformer

The 460/575-230V 175VA Transformer by York is solidly constructed so it can handle tough industrial environments. This unit meets applicable Underwriters Laboratories safety standards for industrial applicability, and comes with a 10 year warranty for your peace of mind.

York's S1-025 is a rigid wiring device for use as a power supply in residential, commercial and industrial applications. Rated as a 460/575-230V 175VA Transformer, its input voltage is rated at 200-240VAC and its output voltage is rated at 115-120VAC. This transformer has a lighted on/off switch for easy identification of the transformer being activated. With a maximum load of 175VA, this transformer can be used with a variety of appliances that include heating equipment including electric heaters, blowers, power tools and more.

The York S1-025-41291-000 is the 460/575-230V 175VA Transformer. It has a 10,000 hour lifetime and can supply power to up to 225 outlets simultaneously.

The York S1-025-41291-000 460/575-230V 175VA Transformer provides dependable power for a wide array of his and her electronic devices. With a convenient 115/230 voltage switch, this transformer covers you from any North American power point. Why not go green? This model works with most energy efficient, magnetic ballasts.

The York QT421 and QT422 motors use a 175VA transformer. The transformers operate on 460/575-230VAC and control the load voltage at approximately 25%. These transformers will work with both 115/120V and 230/240V field wiring.

This industrial transformer is rated at 175VA/100W and has a wattage rating of 460/575-230V. It is a non-NEMA design housing for medium industrial or commercial enclosures. The industrial transformer has a case made out of aluminum with a maximum ambient temperature of 40 degrees C. The industrial transformer features a mounting depth of 29.5mm and a mounting hole size of 22.2mm for easy installation. This industrial power supply can be used as an inverter output, offering less wiring and simpler installation

Designed to withstand the rigors of daily use, this power supply is ideal for setting up temporary or semi-permanent installations such as exhibits and workstations. It offers a wide input voltage range of 9 to 29 VDC and is protected against overloads and short circuits. Its rugged, molded housing provides added durability and weather resistance, making it suitable for indoor and outdoor use. This 460/575-VAC, 175 VA transformer with internal surge suppression and reverse polarity protection can be used with a variety of SXGA compatible monitors. Compatibility is ensured with its detachable cable system that is fully compatible with Dell

The S1-025 is a 460/575 VAC, 175 VA, 100% continuously-rated, single-phase transformer designed for non-dedicated use on York Commercial Air Conditioning systems.

This 175VA transformer is for use with the York 2 position, 2 wire dry contact relay module S1-025-41292-000.

The 24V 175VA 1-Phase Transformer has a 20 Amp secondary output and is used to convert 115V supply voltage to 220V supply voltage. It is suitable for powering electrical equipment rated for 24 Vac at 400 Watts, because it can deliver about 460 VA by using 230 VAC.

The transformer converts an incoming 460 V, 3 Phase, 50 Hz power source into a single phase 230 V, Single Phase AC power source for your electric appliance.

For applications using hydrocarbon fuels like natural gas, propane, gasoline, kerosene, light oils and distillate fuels, this efficiency-enhanced power transformer offers the best combination of regulation and high voltage. It is invaluable for more efficient performance of PID controllers on natural-gas boilers.