York 145310 S1-025-43269-000 Temp Cntrl 245Open 215Close

CNTRL,TEMP,245 OPEN,215 CLOSE

CNTRL,TEMP,245 OPEN,215 CLOSE

The York 145310 S1-025-43269-000 CNTRL,TEMP,245 OPEN,215 CLOSE is a 1/8 HP Direct Drive Condensing Scroll Air Handler for up to 3 Ton Cooling System. This York Air Conditioning Unit features a scroll compressor with a variable speed drive and weather protected model interface board. The operating range of the York AC unit is 42 deg F DT - 122 deg F WB. This air handling device has an airflow rate of 4446 cfm and a static pressure of .4 In H20. It also has a sound level constant of 44 dBA

The York 145310 S1-025-43269-000 Temp Cntrl 245 Open 215 Close is the perfect addition to your HVAC unit. When replacing your old or damaged item you can rely on this product to provide excellent performance. It's durable construction ensures that it will last for years to come.

The CNTRL is a 2-position, 240/208 Volt, non-thermostatic control for use with YORK Heat Pump Systems. Features an adjustable temperature differential of 65 degrees between each set point. A positive locking mechanism provides mechanical override protection against accidental displacement of the controls.

Temp Control Fan Control - Analog Control from off to on position. Then from on to off or on to auto, without changing the setpoint.

The CM145325 is a one-piece system that offers innovative design features to provide precise cooling control. It utilizes an equal percentage valve (E/P) across the entire range of the unit. The E/P works in conjunction with the PWM (pulse width modulation) compressor to produce dependable air conditioning performance even when room conditions change quickly.

This switch functions as a type "C" SPDT ON/OFF/ON control switch. The OFF position, when upwardly rotated, breaks any DC power circuit through the switch while allowing an internal jumper to rotate within the switch, closing the system path. This terminal is for wiring a remote sensor to provide automatic ON/OFF control of a single phase heating or cooling unit. The ON and OPEN terminals are normally connected in a standard configuration.