York 145540 S1-026-25573-007 "7/8""ID Accumulator"

ACCUMULATOR 7/8 INCH ID

The York ACCUMULATOR is the only round accumulator in the industry that features a 7/8-inch ID. This configuration allows it to carry up to 250 GPM, depending on system pressure. The ACCUMULATOR is ideal for applications where large debris is expected in your drainage system such as commercial, municipal, and industrial facilities. Featuring an easy-to-clean cast-iron construction, a safe and quiet design, and a heavy-duty wear ring, the ACCUMULATOR fits into almost any application.

The York 7/8" ID accumulator is a garden hose type vacuum breaker that will protect your water supply from backflow contamination. The heavy-duty PVC drain assembly in a polyethylene case is wall mountable and will withstand pressures to 100 psi.

York's superior performance "7/8" accumulator pumps meet the demand for a working range of zero to 180 psi. Our entire line of pumps incorporates a fully enclosed shaft, maintenance free corrosion-resistant ends and a patented C-design head assembly. With enhanced lubrication points and an easily adjusted venturi, our accumulators provide maximum performance with minimal maintenance.

The York Air Conditioner accumulator is a replacement for this York/Coleman/Hunt/Suburban/Comfortmaker model.

The accumulator's polypropylene gasket fits around the discharge tube and is bonded to the cast-aluminum cover plate. This design ensures excellent pressure and vacuum sealing and eliminates the problem of a gasket failure. The accumulator is assembled with an o-ring seal between the cover plate and body, which ensures superior leakage protection

An Accumulator is a mechanical pressure-reducing valve used to store energy obtained from gas or steam turbine exhausts.

The York QS accumulator-settler with flex joints is capable of handling 0.05 micron size particles in the upstream section, has a capacity of 3.1 gallons, and an inlet pressure of 4 psig. It features cast iron legs, head, inlet tank, inlet nozzle, inlet valve, inlet strainer, outlet strainer, outlet valve, outlet tank with low-friction liner rotor shaft material of nylon resin.