York 150873 S1-3591-00 "7/8""Swt N/C Body ManLiftStem "

VLV,SOL,ME19S270-HP,7/8 ODF,LESS COIL

The York SD-1 Swivel Stem fits all SD-1 bodies. The 7/8"" O.D. stem has a two piece construction that allows for tilt or swing movements of the operator platform.

The York "7/8" body electric actuator is powered with a single phase, 200 amp, 3 wire motor. This actuator is manually lowered using the lifting handle. The lifting handle can be folded down to protect it when in use.

7/8"SWT Newport Brass Body Man Lift Stem. For use with 7/8" bore cylinders.

This 3500 pound capacity stem with two 20' of 5/16" 7x19 wire rope is designed with an all steel body that is crank operated. The 3500 pound capacity Rating gives you versatility in the range of applications you can perform. It is simple to operate and requires only the smallest amount of hand strength to move this stem up and down. This stem has no center column for added strength, space saving design, and reduced weight.

The 3591 Series is the high performance series in the 6000 Series line of electric-powered material handling, light duty work tools. Introduced in 1996, they are available in a wide variety of reach and lift capacities. They offer a modern appearance with a soft grip comfort handle and clean obstruction free design. The quick connectivity feature allows for easy attachment to existing equipment or use on new fixed equipment. Eases operational stress by providing a comfortable reach that leads to fatigue reduction

Designed for use in pools, water slides and diving boards, these electrically operated man lifts serve to raise and lower individuals who would otherwise be unable to access the pool safely. The 31 inch height makes them a useful tool to reach areas above a pool's deck. The 38 inch length of the stem provides a maximum capacity of 465 lbs. while the 11 inch width of the base allows it to be set over a deck flange opening.

With the Swt-N-C Body® ManLift® Stem, you can do more than lift and lower people. It's light weight and compact design offers a multitude of applications in Industrial, Commercial, and Residential environments.

The 115 cm curved roof construction lift combines reliability and ease of operation. The working height over the load platform is 8.40 metres as standard, as well as a choice of 5 or 10 tonne capacity. There are multiple options to increase personal safety and comfort during use, including a D-channel for lashing off tools and harnesses - preventing the chance of tools flying out of reach or being damaged during use.

The YT-3591 is rugged, reinforced and ruggedized for your rugged, rough or rugged rough use.

Mezzanine operator, cast iron gearbox with gear protection

This 34' (10.3 m) reach fall protection platform lift with single person platform is OSHA-approved for general industry use. It features the OSHA-required fall protection system, full body harness and lanyard, OSHA-required steel toed shoes, "all terrain" tires, battery powered electric start engine."

What do you need to move a 300-pound patient from a bed into a wheelchair? You need a 3600-lb. lift capacity, 70-ft. working height, and 100-ft. working length. That's exactly what you get with the 3591-00 from Yorkville—a stretcher bed elevator that meets the most stringent safety standards.