VLV,SOL,E19S270-HP,7/8 ODF,LESS COIL
This solenoid valve with E-19S270-HP actuating mechanism is ideally designed for installation in water heater. It has 7/8" ODF inlet and outlet with 5/16" stem. It uses minimum power of 65 VA.
The 153827 solenoid control station is designed with a 7/8"" ODF outlet and is an oil free design solenoid valve which automatically starts and stops with gaseous controls. It uses a 4077-00 coil which operates as a normally closed or as a normally open configuration depending on the setting of the gaseous load control.
Tested and verified, the S1-4077-00 is ready for your application. This 7/8" 2W N/C Solenoid Less Coil features a long-lasting Pb/Sn plating finish. It's tested to withstand an operating pressure of 5000 PSI at 250F, with a maximum voltage of 35VDC.
A VLV (Valve) is used to open/close the water valves in the heatpump. This valve is electrically operated and can be used to control other products that use water.
The YORK "7/8"" O.D. Feeble Tube Submersible Pump Series S-1 is a totally enclosed, thermoplastic, dual volute, vertical centrifugal pump with a gearmotor drive. The pump's self-priming capability allows it to operate in a dry environment without a dedicated stand pipe or other priming device.
With six (6) and four (4) wire solenoid valve assemblies, the E-Series non-crossover pressure relief valves provide safety relief at critical junctions in a variety of applications. Electromechanical handling of the C.V. plug enables reliable and safe shutoff. Heating capability allows the valve to open in cold weather when oil viscosity is high or when there is no flow in an external control loop. Optional failsafe features prevent trip on loss of power to the driver circuit.
Simple and sturdy, this solenoid valve is designed to comply with all major international codes. Specifically designed for your safety, it is N/C rated and can withstand water flow pressures of up to .5 GPM.
York Solenoid Valves are used for both gravity and pressure fed water systems to control flow in residential, commercial, and industrial applications.
Product
Description:
The York valves have a ball check design that combines a low profile, with a larger diameter of the stem, which allows for higher flow. The internal balance system insures a more stable valve under varying flow conditions.
A reed switch, also known as a reed relay, is an electrical switch operated by an applied magnetic field. They are similar to other electrically operated switches such as the commonly used relays, but use a different mechanism for actuation. Reed switches contain at least two separate
contacts: a normally closed (NC) contact and a normally open (NO) contact. The contacts may be internal to the reed switch or external via separate terminals or studs. When no magnetic field is present, the contacts of the switch are either open or closed depending on their type and orientation. When a sufficiently strong magnetic field is
The YORK refrigeration compressor series is the solution for precise temperature control of compressed air or other liquids. The compressors can be used in all types of refrigeration machinery and heat transfer systems, in HVAC systems, in analytical equipment, in chemical processes and many other applications.