1/4HP 115V 1075RPM 3Spd 48 Mtr York S1-FHM3583

MTR,BLW,1/4,1075/3,REV,115-1-60

This is a 1/4 HP, 115 volt, 3-speed (48,000 RPM), C-Face magnetic motor designed to directly drive an MTR blower.  This can be used on general service and room ventilation as well as light vacuum and pump applications  (depending on model).

Get 3 Speed Pumping power and great value with this 1/4 HP 115v 1075 RPM model from York. The pump is built to last with corrosion resistant materials and a stainless steel pump housing. Match it with your sprayer to meet the demands of any situation:

The York 1/4 HP 115 Volt 3-Speed 1075 RPM (1750, 2000, 2700) Air Rdr. (48 Ft. MNLGHT) can be operated in any 3-Wire 115V circuit to reduce motor noise, operating cost and vibration. Dual ball bearings are standard for maintenance free operation.

York 1/4 hp, 115v 1 phase, 60 cycle, D-type motor, condenser fan cooled. 1/4 HP continuous duty motor with 1.0 to 2.8 horsepower intermittent duty, 3 speed gear box with reversing available for both forward and reverse operation, Explosion proof vent connections standard on 115 VOLT versions to ASME CFR part 1, table 2 and table 3 for external explosion protection to atmosphere and internal explosion protection Cabinet constructed of economic satin electro-galvanized steel

This 3 speed 115v, 1/2hp air compressor operates at 1075rpm with a 0-50psi max pressure. With a durable cast iron base and tank mounted pump head, this unit is perfect for home owners who use it occasionally in the garage, workshop, or basement.

York 1/4 HP 115V Blower/Fan has a Power Cord and is Air Flow: 8400 CFM, 9120 MPF, Handle Type: Cushion Grip and is 3 Speed and comes with a Metal Grille and weighs 29.75 lbs.

Our 1/4 HP water well submersible pump offers a flow rate of 3,150 GPH, 10' power cord with strain relief, and has a 115V motor constructed from cast iron. This heavy duty submersible pump is made for wells, springs, ponds and other remote sources of water requiring a 1/4 hp water pump. The 1/4 HP York S1 features a pre-lubricated bronze sleeve bearing and stainless steel shaft for smooth, efficient operation.