Honeywell 2770 - DSI CONTROL 4 SEC. LOCKOUT,DUAL ROD

DSI CONTROL 4 SEC. LOCKOUT,DUAL ROD

The Control 4 Sec. Lockout Dual Rod from Honeywell is a dual rod handle-set and requires less than one cubic foot of space when mounted on the aircraft. It can be used in any function where a dual rod handle-set is required: main gear energizing, auxiliary gear lock extension from the control column or stud equipment installation. It can also be used in backup mode for control column lock extension, emergency positioning and manual gear extension/retraction.

The DSI lockout allows you to lock down your control panel during work and then unlock it when you need to enter. Dual rod action provides the ultimate in platform stability while three control wheels maximize hose management

The DSI CONTROL lockout board is perfect for lockout activities in the welding shop or lab. This arc-rated switch has 2 lockout rod circuits, which will activate an audible click when both rods are inserted and will easily show

The Honeywell D4270 is a Glidepath® Dual Rod, 4-Second Control Lockout with a single pole and center off configuration. This control features a steel handle and is suitable for 3/8-Inch cables.

The Control 4 dual rod lockouts will help prevent the door from being opened while the lock is engaged. The Control 4 offers the maximum amount of protection in a single point lock and can be used for patient rooms that house one or two patients. If you are looking for other options please refer to our complete line of door locks, or call us at 800-484-4980.

If you find that your utility meter control box needs to be locked out, then order the REN 2770-DSI. This handy lockout control will automatically turn off power supply for up to 2 minutes after the door is opened, and lock out after 24 hours of someone leaving it open…or you can manually lock it out when you need to by pushing the red button on the front of the unit.

Tight shutoff is maintained by the unique dual-rod mechanism that controls both valves.