Bloomfield 481120 SAFETY THERMOSTAT;

SAFETY THERMOSTAT;

Did you know that 3 out of 4 home heating fires are caused by human error? No more burnt popcorn or accidental late night cooking. The SAFETY THERMOSTAT can help you avoid a home heating fire. One simple control on a friend's furnace (in fact, all furnaces) eliminated the need for her to remember to turn off the furnace before going to bed and helped prevent popcorn from getting burnt. Save yourself time and energy with this simple safety solution for your furnace.

The Bloomfield 481120 SAFETY THERMOSTAT; is an economical, easy to use safety-thermostat used with coal and oil fired water heaters to prevent overheating from a loss of combustion air. This thermostat is CSA certified.

THERE IS AN UNCONTROLLED WATER SEPARATOR IN THIS TANK. THE SAFETY THERMOSTAT IS NOT TO BE REMOVED DURING OPERATION OF THE WATER HEATER. IF IN DOUBT, CONTACT AN AUTHORIZED SERVICE DEPARTMENT

The two stage Safety Thermostat will protect you and your family from scalding water. It will prevent the hot water tank from filling or spilling its contents after reaching a predetermined temperature. It is easy to install and economical.

The Safety Thermostat is a perfect addition to your electric or gas-fired fireplace or stove. It can also be used for wall heaters and other types of heaters, and controls heat output to prevent overheating.

The Safety Thermostat feature on this Bloomsbury heat pump system monitors the temperature in your home and will automatically turn off if the temperature rises above a pre-set level; usually set at 80 degrees.

Used to keep heating and/or cooling systems from going on standby, this control switch set with a safety thermostat will shut down the system if it becomes overloaded with snow, ice or trash.