SCHNEIDER ELECTRIC 9050JCK70V20 -Square D 120V 10A DPDT 11Pin Relay

120V 10A DPDT 11Pin Relay

This Square D 120V 10A DPDT 11Pin Relay is a high quality product and is very useful in the electrical field. It has been used on both industrial and domestic applications. The relay is a spark-free device that switches loads with embedded switching logic and provides additional protection and coordination. It has a contact capacity of 10A at 125/250VAC, Max voltage of 250VAC at DC coil, Pull in voltage of 6-12VAC/DC at coil, Contact resistance less than 0.02 Ohm at 1mA, Max current of 6mA at VDC output, Ambient

The Square D model 120/10A DPDT relay has dual rating for lower power applications. Make/break make power handling is 10 Amps continuous, rated current 2500 Amps. The make/break trip with rated voltage 120VAC / 125VDC. It is rated for 250VAC / 125VDC continuous duty and 500VDC for 30 seconds. It comes with 11 pin connectors. Insulation resistance is 5000M Ohm min at 500 Volts DC.

This Schneider Electric / Square D / RPI Relay is ON-(Normally Open) ,120V 10A SPDT, It comes with a green painted metal housing and a black molded plastic base. The body has a 10 pin DPDT 11 pin terminal block. This 11 pin terminal relay can be used in manual/remote switch applications for applications such as security and signaling systems while meeting NEMA specifications.

SCHNEIDER ELECTRIC 9050JCK70V20 is a 10A DPDT relay with low voltage control lines for use in 120-volt ac control applications including lighting control. This 10A DPDT relay provides a way to switch and control mains power loads from 120-volt ac switching devices. The head allows for direct mounting of the relays onto the printed circuit board, making installation easy and enclosed in a surface mount weatherproof housing. With its die cast aluminum baseplate, polycarbonate cover, and general purpose contacts, this DPDT relay allows for long term reliability while also decreasing

11-Pin DPDT Relay (1 coil) with Normally Closed (N.C.) contacts rated for 120V AC/DC Max at 10A, 4-38VDC.

This industry standard 11 pin relay features a lightweight molded plastic case and comes with 22AWG power and control contact wires. It is designed to provide protection from nuisance tripping sending unwanted feedback to the fire alarm panel while providing reliable trip indications.

The Square D NEMA 11 (120/240VAC) Relay 9050JCK70V20 is used to control other devices in a control system. This heavy duty normally open solid state relay has a minimum switching capacity of 10A and rated voltage of 125VAC. The maximum switched voltage is 125VAC. This relay works with voltages from 48VDC to 1000VDC at various amperage capacities. The switching function is a DPDT (Double Pole, Double Throw) relay that switches up to 20 Amps AC or DC using a solenoid coil. It includes overload protection with