ERIE VT2213G13B020 Schneider Electric () "1/2""SW 3.5CV NC 120V ON/OFF"

120V 1/2" SWEAT 2-WAY N.C. ZONE VALVE 3.5Cv WITH 1

The VT2213G13B020 is a 120V 1/2" sweat 2-way N.C. zone valve 3.5Cv with 1" NPT port and with "-10" suffix, shrouded, 0°F to 110°F temperature rating, brass bonnet, ball lever actuator, stem discharge (vertical) flow pattern.

The Schneider Electric 1/2" Sweat 2-Way NC Zone Valve 3.5Cv with 1 is a zone valve and is an ideal solution for applications that require airflow in both directions, or if the direction of flow reverses frequently. This device has an adjustable snap-action, and can be used with dampers to control the flow of air. This zone valve includes a gasket, and is made from brass.

The ZONE Valveis a low voltage control valve used to isolate zones in an HVAC system. This particular zone valve is a 120V 1/4" sweat 2-way N.C. zone valve with 3.5Cv and 1/2" male screw x 1/2" male pipe connections.

This air balancing valve has the ability to control different air volume with 1/2" ports. It is perfect for use in a variety of HVAC applications that require precise control of the air. The AIRBALANCE 2-WAY N.C. zone valve is made from brass material that will provide long lasting durability. This particular model has a port size of 1/2" and it carries a max liquid temperature of 140F degrees. The ball valve design allows for easy installation and this product comes backed a limited lifetime warranty from ERIE ELECTRIC CO,.

The ERIE VT2213G13B020 Schneider Electric () "1/2""SW 3.5CV NC 120V ON/OFF" has an automatic voltage & a type of builder. Weighing in at 0 lbs., this product boasts a voltage control motor and is constructed with builder. It has a max temperature limit of 0 degrees C. Model# ERIE VT2213G13B020

These normally closed, 2-way zone valves from ERIE are used to control flow under pressure. They have a maximum temperature rating of 221F and can be vertically mounted in a standard 1/2" N.P.T. back box.

This new one-piece low-lead brass zone valve is designed for use with cold water systems and as supply and exhaust valves. SW head ISO 5211 fitting. Supplied with molded EPDM gaskets. The VT20 Series is designed for use with non-aggressive liquids such as chilled water, process water, ice condensate, mineral oil etc.