SCHNEIDER ELECTRIC 9013FYG2J25P Square D by Air-Pump Pressure Switch, NEMA 1, 60-80 psi Pressure Setting, 20-65 psi Cut-Out, 15-30 psi Adjustable Differential, Pulsation Plug

25-80# DPST PrssSw D/A 60/80#

Diaphragm for Barber-Colman M573 actuator

They are designed to be used in conjunction with the M575 electric actuator and the 3M571 electric actuator

The diaphragm is positioned between two flat plates; when the diaphragm expands, air flow increases; and when it contracts, air flow decreases

The Schneider Electric 30315 (Barber Colman) N800-9423 DIAPHRAGM 2473 SERIES is a component part of the M573 Actuators

This diaphragm is used for the M573 Actuator

Plastic parts are more resistant to chemicals and are recommended for systems where there could be liquid or gaseous chemicals present in the application

Working Pressure, 3 to 5 PSI with ANSI 150 lbf

This is a heavy duty diaphragm that is designed to withstand high pressure and temperature conditions

The diaphragm is attached to a screw that can be turned in either direction to control flow

, 300 psi Max

Flange Mounted

DIAPHRAGM, BARBER COLMAN, N800-9423, Description: This is a replacement diaphragm for Barber Colman Actuator no

21-841

For the replacement of diaphragms on Barber-Colman®, Parker®, and other industrial valves with 3/4'' to 4'' NPSM ports

The material of this part can be metal or plastic

This pneumatic actuator is ideal for residential and commercial applications including HVAC zoning and zoning of parking garage doors

High quality material, Fast delivery and good after-service are provided

The Schneider Electric 30315 (Barber Colman) N800-9423 Diaphragm 2473 SERIES is an additional part that is used for the M573 Actuators which offer a firm, consistent push

1X Barber Colman N800-9423 DIAPHRAGM 2473 SERIES 21-841

Schneider Electric Single-Stage High Pressure Diaphragm Control Valve, Barber Colman, N800-9423, 3/4 x 2-1/8 Inch Outlet x 1-3/4 Inch Inlet, 1

The M573 is used in applications where flow rate regulation, pressure regulation, or variable force are required

This diaphragm is spring loaded and can be used in high pressure applications

The M573 is a pneumatic actuator with an integrated solenoid valve that opens the actuator to deliver air pressure to the designated zone

It is connected to the process system and keeps the fluid in the specified area

5 to 20 GPM Max