SCHNEIDER ELECTRIC TK-1281 (Barber Colman) 55/85F HT-COOL TSTAT 2-PIPE

55/85F HT-COOL TSTAT 2-PIPE

The 9999D20 is for use in standard mechanical interlocks, limit switches and data acquisition systems

Connect the load and signal wires between the main contact and the auxiliary contact

5A at 24VDC, allowing them to be used without concern for excessive power consumption

Schneider Electric 9999D20 2 N/O Auxiliary Contacts are easy and inexpensive to install in a variety of low voltage control systems

These contacts can be wired directly to a controller or they can be used with a switch or other mechanical device

The 9999D20 2 N/O Auxiliary Contacts are used to provide the end-of-line protection

The contacts are self-cleaning and have a built-in flame arrestor that eliminates the need for field cleaning

Connectors: 2 N/O Auxiliary Contacts

This can be used to activate a visual or audible warning, or to disconnect power from equipment before a fault condition occurs

Ideal for machine guarding and safety shut off applications, these auxiliary contacts are suitable for use in hazardous locations

This module provides two normally closed and two normally open auxiliary contacts

The contacts are rated at 3A @ 250VAC, and have an actuation force of 8 oz

They contain an integral blowout proof seal

The Schneider Electric 9999D20 2 N/O Auxiliary Contacts is an auxiliary contact designed for use in electrical devices, such as electric motors, transformers and circuit breakers

It is an ideal solution to protect certain electrical components from overcurrent and short current

2 N/O Auxiliary Contacts 9999D20

These contacts are routed to any of the 100 A or 20 A/100 A/200 A circuits on the load center

The 9999D20 is an auxiliary contact module for use with the Schneider Electric QO load center

They are packaged in a compact housing that is designed for convenient mounting in tight locations and on metal or plastic boxes

Use this 2 N/O auxiliary contact to connect to a switch or other controller device

Each auxiliary contact has an operating current of only 0

Schneider Electric 9999D20 2 N/O Auxiliary Contacts 9999D20

The 9999D20 is capable of operating up to 12,000 operations per hour at rated voltage and frequency

The Schneider Electric 9999D20 2 N/O Auxiliary Contacts is a Stamped Steel Body with Tin Coating, 2 Circuit, SPDT Auxiliary Contact