SCHNEIDER ELECTRIC VS-7323-593-4-11 2"3W DIV NPT 24VAC/DC PROP S/R {Barber Colman}

2"3W DIV NPT 24VAC/DC PROP S/R

These auxiliary contacts are commonly used for trip protection on overload and short circuit applications

The 1/4 in (6mm) mounting hole is provided for attaching the switch to a surface or panel with screws

Square D has been setting the standard for excellence for more than 100 years

25", Overall Width 1

Schneider Electric Square D LADN02 2 N/C Auxiliary Contacts

Designed for use with Square D load centers and panels, these 2-pole N/C auxiliary contacts are ideal for remote disconnection

They are made with silver contacts to improve electrical efficiency and resist corrosion

For use in conjunction with existing circuit boards to provide additional switching points

The Schneider Electric (Square D) LADN02 2 N/ C Auxiliary Contacts are used to electrically connect two normally-open contacts in a circuit

It features two normally-open contacts which are rated for 120 VAC, 50/60 Hz and 24 VAC, 50/60 Hz

Schneider Electric (Square D) LADN02 2 N/C Auxiliary Contacts, 20A Amp @ 240V, Voltage Rating 240VAC, SPDT Contact Configuration, Overall Height 5

Square D™ LADN02 2 N/C Auxiliary Contacts Schneider Electric

68", Overall Depth 1

The Auxiliary Contacts are used for special functions for the LADN series circuit breaker

You can easily connect these contacts to wires via screw terminals

Schneider Electric (Square D) LADN02 2 N/C Auxiliary Contacts, Max Contacts: 2 @ 120/240 VAC, AC or DC, Max Amps: 15 A at 120/208 VAC, 15 A at 240 VAC, 8 A at 24 VAC & DC

Schneider Electric (Square D) LADN02 2 N/C Auxiliary Contacts2 N/C Auxiliary Contacts On-Off, normally open auxiliary contacts

Schneider Electric Square D LADN02 2 N/C Auxiliary Contacts is a 2 Pole, Normally Open Auxiliary Switch

The contacts are designed for use with non-polarized, general purpose loads

This contact is housed in a square D style enclosure, which measures 3

66" x 1

Square D C0119 Series LADN02 is a 2 pole with two N/C Auxiliary Contacts

22" x 1

It has a Current Rating of 10 Amps at 125 Volts AC and a Voltage Rating of 250 Volts AC

As the world's largest manufacturer of circuit breakers, switches and power distribution products, Schneider Electric provides consumers, installers and contractors with innovative solutions to meet key challenges in power quality, distribution and energy efficiency

This Square D Auxiliary Contact, 2 Poles, 3 Wires (2 N/C), is used to open or close an electric circuit

The contacts are field-adjustable and terminate in a single 1/4’’ stud that is compatible with most wiring devices

05"