"4-20MA 0-50# 1/4"" # TRANSDUCER"
The 4-20MA 0-50# 1/4"" # TRANSDUCER is a transmitter to connect to the setra controller. The Setra controller will trigger the valve once it receives the electrical signal from the Setra Transducer. Make sure you have a setra controller before purchasing this product.
Setra 2091050PG2M1102 4-20mA 0-50# 1/4" Transducer (2091050PG2M1102) Features: Sturdy, compact, waterproof design has superior noise immunity and offers true strain gauge performance. With a standard 4-wire BNC connector and shell size of only 1.3" in diameter^ and 3.5" long, the Setra 2091050PG2M1102 is an excellent choice for portable sensing applications where ease of installation and cabling is important.
The 4 - 20 mA linear output transducer (Setra part number 2091050PG2M1102) is used with the Setra flowmeters and transmitters. Standard for flowmeters, it has an operating range of 0 to 50 gpm and a pulse frequency of 100 Hz. Speed of sound is 690 m/s at 32°F, 1 atm, and 59°F;
Whether you need to measure a high level of pressure or a small level of position, the Setra ® 4-20mA Transducers have you covered with the largest output ranges available for your application. With PC interface options, these Transducers can be installed virtually anywhere in your process.
This #991 Series hydraulic pressure transmitter offers four ranges of measurement from 0-20, 0-50, 0-100 and 0-500 PSI. This single output transmitter uses a 24VDC supply with a 4-20 mA signal output display. These compact, splashproof transmitters are designed to withstand the harsh environments of mobile field equipment. A vacuum tight diaphragm housing ensures both a rugged unit and accurate operation in low pressures. The transmitter is delivered with a variety of mounting and lead configurations.
Monitor pressure, temperature & level changes in your commercial refrigeration & freezer systems. 4-20mA output signal can be sent to transducer interface for recording and display on a control panel or master control system.
The JS200 series of low-cost, compact 4-20mA transmitters is designed for simple installation in a variety of applications. The transmitters combine rugged construction with an easy to read display to simplify installation and operation. The patent pending SQUEEZE™probe connection cable (Setra standard model) has a simple push-to-make connection which takes the place of both a transmitter and probe saving significantly on installation costs. It also reduces the risk of loss of valuable product during installation, and allows easy probe replacement once in the field.