SIEMENS MT0075A Industrial Controls 75va Trans 240/480->120v

75va Trans 240/480->120v

When you can't always control the environment, rely on OEMs original replacement parts to ensure the right fit and performance. Siemens MT0075A Industrial Controls 75va Trans 240/480->120v uses only the best and latest technology and its various warranties and certifications (UL/CSA/CE) back it up.

This 75VA transformer from Siemens can be used as a 120/240 to 120V 75VA line transfer unit. When used as a 240/480 to 120V 75VA transformer, the MT0075A converts incoming line voltage to normal household voltage.

The SIEMENS MT0075A is a 75VA transformer from the Masterview family of industrial controls to be used in the field conversion of 240/480 volt input to 120 volt output. This transformer can be used in rural areas where normal electrical service line voltage is 240/480 volts and the service drops to a 120 volt circuit.

The MT0075A industrial control is a transformer designed to convert 240V industrial voltage to 120V for use with household appliances. It is rated at 75VA and has a primary to secondary voltage ratio of 2:1. It transfers 240V input to 120V output and features a soft start functionality.

The MT0075A is a single phase, two wire, 120/240 Vac, 50/60Hz rated transformer with a 75 volt 0.9 Amp primary.

Simple circuit breaker used for all 120VAC single phase loads from 1/8hp to 5hp. Designed for use on a single phase, 240/480 Vac supply where a separate neutral wire is present in addition to a hot and a ground wire. Great for powering fans, blowers, pumps, etc. Requires a pull chain operation.

The MT0075A has many instruments available to help monitor your process. The MT0075A is a dual voltage, transformer isolated, 120/240 volt, 50 hertz +/-3 hertz power supply with internal frequency converter.

The MT0075A is a high voltage (Hi-Pot) 2000 watt (sine wave output) motor starter. The MT0075A motor starter is designed specifically to be used with both resistive loads or inductive loads. It can even be used to start either direct or induction motors that use an end shield. This powerful transformer is built with 2 (2) Nema 1 protection start windings, each rated up to 200 Amps @ 480VAC for total double rated current capability of 400 Amps. These important features help ensure safe performance during overload situations, especially when starting inductive loads. The

The MT0075A Siemens wiring devices are magnetically coupled, mechanically adjustable controls. The operator is certified for 175V to 480V AC (on the AC side only); the set point for these devices is 120V. They are offered in AC voltage models ranging from 24V to 480V AC; DC voltage models up to 24 V DC; single-pole, double-pole or four pole; and SPDT or DPST; and controlling resistive (75%), inductive (60%), capacitive (60%) or variable loads. They are offered in SPNO, SPNC, SPDT, SPDNO

SIEMENS MT0075A Controls. Industrial. 1450 Watt. (3) (3) (1) (1) (1).

All of our Power conditioners are NEMKO and CE certified. The MT0075A is designed with high frequency start up and transformer soft starting that helps minimize system stress.

The SIEMENS MT0075A Industrial Controls have a wide range of applications, making them the best choice for almost any need! These ATEX certified indoor lighting controls are perfect for controlling overhead lighting in warehouses, parking garages, and commercial buildings. They are also ideal for controlling retail display lighting, chain store lighting, greenhouse lighting - even street light systems!