Sloan Pwt El154 Transformer 24 Volt Plate Mount
The Sloan PWT-EL-154 is a 24 Volt 120VAC Plate-Mounted Transformer with Power Factor Correction Capability. It provides power for operations such as ionizing electrodes and piezoelectric transducers used for swimming pool and spa applications. There currently few transformer manufacturers supplying this conversion range.
The PWT EL-154 24V, 50VA Plate Mount transformer is perfect for use with most Sloan and Artograph products. (
One Connection, three settings with the Sloan EL-154 transformer. For high pressure sodium fixtures, this transformer has extended voltage range and is UL and cUL listed for outdoor use. With six pin base and 24 volt plate mount capacity, the EL-154 is ideal for installation into ballasts.
The EL-154 is a 24 volt mounting plate transformer with 120 volt and 12 volt outlets and a fused and grounded safety plug.
Plate-mount transformers from Sloan Electric are available in a variety of voltages and current capacities. This 24V 120VAC to 24VDC transformer is rated at 154VA. The EL series use a type K heat sink which can get hot, especially when used with a filtering choke, so consider adding a fan for cooling if needed.
EL-154 Transformer 120 or 240 Rev/Volts, 24 or 50 Watts. Chrome Enclosure, NEMA 1 enclosure. UL Listed.
EL-154 120VAC/24VAC, 50VA Electrical Box Mount Water Pump Transformer This product is a small, high quality transformer for supplying power to a Water Pump.
Designed for use with Sloan automatic soap dispensers, however can be used with a variety of products designed to work with 24V AC systems. This replacement transformer will provide continuous operation for 24 hours without a hum or buzz while utilizing less energy compared to conventional models. The high-quality steel construction is built to last, and will save you money in the long run.
The EL-154, designed for use with the EL-B01, EL-01, and SLN-01 sensor heads is a 24 VAC, 50 VA transformer. It contains three independent output voltages: one 0-24 VDC for driving the Pt100 sensor element directly, one 0-24 VDC for driving a Pt1000 sensor element directly (with 10 O series resistor), and an 0-24 VDC output that is electrically isolated from the other two outputs. The EL-154 contains transient protection and an LED that indicates operation status.
The EL Series transformer is available for 24 VAC applications. This unit is designed to fit under a single-phase 120/208 Volt wave, single-phase 240 Volt wave or single-turn 277 Volt wave. It is provided with a mounting bracket that clamps on to the tubular access port of all faucets.
White color 120/24 Volt 50 VA This transformer has a mounting bracket for attaching to the electric field of water pipes using 2 screws. The mounted transformer has a
Elitezone LED Strip Light Kits that retrofit into your existing fluorescent strip fixtures, perfect for offices, retail spaces, and warehouses. The kits include everything you need to finish the project: strips, end caps, power supply and the transformer.