Sporlan Controls 401865 "1 1/8""Sweat Liquid Line Drier"

"1 1/8""Sweat Liquid Line Drier"

Sporlan Controls 401865 "1 1/8""Sweat Liquid Line Drier" has internal filter element to remove contaminants, compressed air fitting with sight glass, temperature switch to cutout at 180°F.

Sporlan Controls 401865 "1 1/8""Sweat Liquid Line Drier". Genuine OEM Product

The 401865 "1 1/8""Sweat Liquid Line Drier" with ¼" Male Iron Swivel Nut is made of nickel-plated brass for corrosion resistance, durability, low maintenance and long life. This sweated line drier has provisions for mounting with screws or snap rings.

The Sporlan Controls 401865 "1 1/8""Sweat Liquid Line Drier" is designed to dry liquids that are at the end of the supply line. This Sporlan Controls 401865 "1 1/8""Sweat Liquid Line Drier" is manufactured to heat all fluids. The Sporlan Controls 401865 "1 1/8""Sweat Liquid Line Drier" has a 1 Year Limited Warranty on Defective Product. The Sporlan Controls 401865 "1 1/8""Sweat Liquid Line Drier" effectively reduces moisture levels in the room it

Sporlan Model 401866 is a 1 1/8" Sweat Liquid Line Drier. It features a solid brass constructed external shell for corrosion resistance and heat transfer, zinc die cast on/off knob, an internal pilot light pilot flame pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot pilot on/off knob on/off knob on/off knob on/off knob on/off knob on/off knob on/off knob on/off of being being being being being being being being being being being being

Sporlan Polysorb 401865 1 1/8" Sweat Liquid Line Drier complies with the requirements of the National Fuel Gas Code, ANSI Z223.1 2009 Section 4.10.5 which allows using polysorb for sweat fittings

The 401865 Liquid Line Drier from Sporlan presents a reliable choice for many applications. The unit is constructed with electro-plated brass and stainless steel, and features a simple plug or pressure connection. The nozzle is rotates 270 degrees, and includes an air vent for quick-connect use. Its low flow restriction will prevent flooding and frozen pipes in cold weather. Order this part today."

Made in the U.S.A. ! ! ! ! !

The Product Description is intended to provide information about how the product is used, what it does, and how it compares to similar products.

The 401865 reduces water hammer by providing an orifice for water to flow by gravity when the pump is off. This retains hydraulic pressure in the system during no-flow periods. The result is generally very fast cycling time, so valves open and close faster. The unit has a flow capacity of 18 gpm, a water temperature rating of 210° F, and a full vacuum rating of 26" Hg. Package Quantity 5

Feedback from the field suggests that the plenum fuel filter tends to plug. In this relay, a time delay variable flow drier is used to extend the life of the filter. It also improves system performance by maintaining a constant wetted area on the filter to prevent clogging.