Proto B983746 Proto 3/4" x 5 Meters/16' High-Vis High Impact ABS Case Tape Rule

Stanley 30-496 3/4" x 5 Meters/16' High-Vis High Impact ABS Case Tape Rule

It also works well for cutting such materials as glass block, thin brick or terra cotta and laminates

The design of the arbor allows for easy replacement and installation with a simple twist

arbor and diamond knockout holes in the saw plates

We're local - we live here

On ripping cuts, this provides more wood per tooth to remove and helps remove material faster as your blade does not need to swing as far as standard blades

This DeWalt combination blade has a Diamond Knockout Arbor that is designed for use in most brands of 7-1/4 circular saws

The 40 tooth ATB (Alternate Top Bevel) tooth design helps provide maximum cutting performance on the bottom side of a material when ripping, as well as cross-cutting on both sides

The 7-1/4-Inch, 40 Tooth Dewalt DW3325 7 1/4" 40 Tooth ATB Combination Saw Blade with 5/8" and Diamond Knockout Arbor, Silver is a blade for both ripping and crosscutting

DeWalt 7-1/4" Combination Saw Blade with 5/8" and Diamond Knockout Arbor,Silver (DW3325)

If you're looking for help deciding what the best tool(s) for your job might be, give us a call

For a fast, clean, and smooth cut every time, get the DeWalt DW3325 7-1/4-Inch 40 Tooth ATB Combination Saw Blade with 5/8-Inch and Diamond Knockout Arbor, Silver

This DeWalt DW3325 7-1/4-Inch 40 Tooth ATB Combination Saw Blade has a 5/8in

This blade is designed for cutting ceramic tile, brick, block, stone and other masonry materials

This blade also features an ATB grind that helps it cut faster than standard combination blades

It has an ATB tooth form for aggressive cutting

We've been in the business of selling Milwaukee, DeWalt, and other professional power tools since 1999

It has a large tooth count and a small arbor which allows you to make fast cuts on thin materials

Get all the best cuts using this 7-1/4 Combination Blade for DeWalt Saws

The silver finish is designed for universal applications, making it ideal for use in steel, aluminum, and wood

Ideal for plunge, miter, and flush applications, can also be used for miters and general purpose crosscuts in wood trim

The blade has an extra cutting edge at 90 degrees to the main tooth form to increase the effective tooth width without influencing the chip-throwing characteristics of the teeth

This is the blade you need to make clean crosscuts, rips and compound cuts in all types of materials, including non-ferrous metals, plastics and laminated flooring